19x10.5 +22 All Around? Easy / Hard ?
#1
Pole Position
Thread Starter
iTrader: (2)
Join Date: Sep 2003
Location: Hawaii
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
19x10.5 +22 All Around? Easy / Hard ?
I was looking at picking up some wheels and wanted to get 19x10.5 +22 All Around.
I like non staggered fitment because of the face design is concave all around vs just being concave in the rear.
How hard / easy is it to fit this fitment on a IS350?
Im a n00b when it comes to IS350 fitment so please bare with me.
Thanks!
I like non staggered fitment because of the face design is concave all around vs just being concave in the rear.
How hard / easy is it to fit this fitment on a IS350?
Im a n00b when it comes to IS350 fitment so please bare with me.
Thanks!
#6
Pole Position
Thread Starter
iTrader: (2)
Join Date: Sep 2003
Location: Hawaii
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
when you guys say serious fender mods, do you mean roll to where its almost flare but do not chip the stock paint.. also camber will also help with aiding the fitment.
i plan on running on coilovers..
Is there an aggressive wheel thread in the 2IS forums?
i plan on running on coilovers..
Is there an aggressive wheel thread in the 2IS forums?
#7
Lead Lap
iTrader: (1)
Join Date: Sep 2007
Location: Bay Area, Ca
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
yes, there is an aggressive wheel thread.
depending on the wheel company you choose, they offer two differect faces, standard or concaved. i know for a fact that the volk te's offer 2 faces.
i personally thinkg 10.5 +22 is super flush but for the front, thats too much. you would need some serious fender work on the front. not a fender roll but more likely a pull.
depending on the wheel company you choose, they offer two differect faces, standard or concaved. i know for a fact that the volk te's offer 2 faces.
i personally thinkg 10.5 +22 is super flush but for the front, thats too much. you would need some serious fender work on the front. not a fender roll but more likely a pull.
Trending Topics
#11
Lexus Test Driver
iTrader: (1)
Join Date: Aug 2008
Location: Socal
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
not trying to thread jack but i'm looking into some rims too, you guys say 19x10.5 +22 is do-able in the rear w/ some shaving but how about 19x9.5 +22 front? i'm pretty sure its to aggressive, it would need to be +30's to 40 but just want to verify from someone who knows the offsets on our cars.
Last edited by xuningshen; 01-15-10 at 07:04 PM.