Yellow fog vinyl overlays?
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2009
Location: TX
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Yellow fog vinyl overlays?
hi everyone! I'm new to this forum, and I just got my '07 starfire pearl IS250. I don't really know that much about this car modding stuff, but I was thinking of putting yellow fog vinyl overlays, but I'm afraid that if I don't want them anymore.. it won't come off
should I get them or would 3k fogs be my best bet? thanks everyone!
should I get them or would 3k fogs be my best bet? thanks everyone!
#2
Driver
iTrader: (2)
If you are not sure what you want or don't know if you are going to like the yellow fogs, I would say take the cheapest route possible and that is yellow overlays. I have not tried myself, but they are supposed to come off easily with a heat gun or hair dryer. Maybe someone else can confirm....
#5
Driver School Candidate
Thread Starter
Join Date: Sep 2009
Location: TX
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
If you are not sure what you want or don't know if you are going to like the yellow fogs, I would say take the cheapest route possible and that is yellow overlays. I have not tried myself, but they are supposed to come off easily with a heat gun or hair dryer. Maybe someone else can confirm....
thanks! haha, I will try out the yellow overlays since I know I can take them off now!
Trending Topics
#14
I went with the optic blue overlays from Aerotect, pretty happy with the results and looks pretty good on starfire pearl IMO
applied using the wet method, I think this is the better method to be able to align it properly
for comparo purposes
applied using the wet method, I think this is the better method to be able to align it properly
for comparo purposes
#15
I've got the optic blue as well and am very happy with it. I just installed Garax 6000K HID lows. Unfortunately, the Garax bulbs do not match as well with my PIAA Extreme White Fog bulbs as they did with the stock HID's. The PIAA bulbs now look very yellow in comparison when matched before with the stock bulbs, they matched better. (Stock HID's are yellowish to begin with)
I would like to possibly swap the PIAA's with a yellow bulb, BUT keep the Aerotect optic blue fog overlays.
Anybody know how that will look? Are yellow bulbs enough to give a solid yellow color beam or are the yellow overlays necessary as well? Which brand of yellow bulbs are best?
.
I would like to possibly swap the PIAA's with a yellow bulb, BUT keep the Aerotect optic blue fog overlays.
Anybody know how that will look? Are yellow bulbs enough to give a solid yellow color beam or are the yellow overlays necessary as well? Which brand of yellow bulbs are best?
.
Thread
Thread Starter
Forum
Replies
Last Post