-----IS250 Retrofit is complete-----
#16
Lexus Champion
iTrader: (10)
Join Date: Dec 2007
Location: Diamond Bar/Irvine, CA
Posts: 1,602
Likes: 0
Received 3 Likes
on
2 Posts
Yeah its possible just swapping out the lens, but the hard part will be finding lens that fits the projector housing. Gotta do some research to matchup the specs... but you will definitely get much better results doing the full swap/retro.
#17
Lexus Champion
iTrader: (10)
Join Date: Dec 2007
Location: Diamond Bar/Irvine, CA
Posts: 1,602
Likes: 0
Received 3 Likes
on
2 Posts
Yes I did do a color mod with washers. It took some time to get to the color I wanted.
I am thinking of redoing this retro with a better and different projector combo even though I do not know exactly with what; but it will be done in the future. I will start testing after more research and trail and error to find a better combo to produce even more WIDTH (namely speaking).
I am thinking of redoing this retro with a better and different projector combo even though I do not know exactly with what; but it will be done in the future. I will start testing after more research and trail and error to find a better combo to produce even more WIDTH (namely speaking).
my old s2k retro...
#18
Lexus Test Driver
iTrader: (1)
Join Date: Jun 2008
Location: NYC
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
the LS is far too large to fit into the IS250/350 housing
the TSX is inferior to his current modded RX set up
The OEM s2k projector is roughly similar to his set up now
if anything is my guess, i'd say that he's waiting for the next big single xenon projector.
Perhaps a modded RL with tsx-R clear lens?
hybrid sc430+rx330+E30s?
the TSX is inferior to his current modded RX set up
The OEM s2k projector is roughly similar to his set up now
if anything is my guess, i'd say that he's waiting for the next big single xenon projector.
Perhaps a modded RL with tsx-R clear lens?
hybrid sc430+rx330+E30s?
#19
LS is too big for the IS headlight. The TSX projectors are not as good as the RX330 with custom shields. The RX330 with custom shields are more brighter and intense than the S2000 projectors; there was a side by side compare with the RX330/custom shields vs S2K. The Hotspot on the RX/custom shields kills the S2k's
#20
the LS is far too large to fit into the IS250/350 housing
the TSX is inferior to his current modded RX set up
The OEM s2k projector is roughly similar to his set up now
if anything is my guess, i'd say that he's waiting for the next big single xenon projector.
Perhaps a modded RL with tsx-R clear lens?
hybrid sc430+rx330+E30s?
the TSX is inferior to his current modded RX set up
The OEM s2k projector is roughly similar to his set up now
if anything is my guess, i'd say that he's waiting for the next big single xenon projector.
Perhaps a modded RL with tsx-R clear lens?
hybrid sc430+rx330+E30s?
Yes I am thinking about the RL with clear lense and the SC430/RX330/e30 combos. They are definately on my future retrofit list for my IS.
#21
Lexus Champion
iTrader: (10)
Join Date: Dec 2007
Location: Diamond Bar/Irvine, CA
Posts: 1,602
Likes: 0
Received 3 Likes
on
2 Posts
hmm haven't been in the lighting scene for awhile so i guess i'm out of it now LOL... time to readup on hidplanet again i guess...
did you have to make custom brackets and do the whole jb weld thing with the 2IS housing or do the mounting holes matchup?
did you have to make custom brackets and do the whole jb weld thing with the 2IS housing or do the mounting holes matchup?
#25
Pole Position
iTrader: (1)
Hey great work, finally done with it. Now our headlights look the same since we both have the ace flanges. Glad it turned out great for you. I am actually doing my foglight retro right now too, you should get it done too so we can be the only 2IS with retro lights. (Sorry ELLY, but hurry up and get yours done!) I will be positing up a DIY for the fog light retro very soon though.