Headlight Adjustment Success!
#106
Lexus Test Driver
iTrader: (9)
Join Date: Apr 2006
Location: VA
Posts: 1,068
Likes: 0
Received 0 Likes
on
0 Posts
I actually used that method, its really easy. The sensor is behind the rear driver side wheel. Need a 10mm socket. Once slightly loose, adjust the screw down for HID level to move up. I found more info on this in the suspension area somewhere after ppl kept having issues with AFS after lowering their cars. I think its similar in the GS model.
#107
Pole Position
iTrader: (11)
I actually used that method, its really easy. The sensor is behind the rear driver side wheel. Need a 10mm socket. Once slightly loose, adjust the screw down for HID level to move up. I found more info on this in the suspension area somewhere after ppl kept having issues with AFS after lowering their cars. I think its similar in the GS model.
#109
I actually used that method, its really easy. The sensor is behind the rear driver side wheel. Need a 10mm socket. Once slightly loose, adjust the screw down for HID level to move up. I found more info on this in the suspension area somewhere after ppl kept having issues with AFS after lowering their cars. I think its similar in the GS model.
#110
Lexus Test Driver
#113
Lexus Fanatic
iTrader: (1)
It's in there. Under the DIY maintenance- Headlight Aim section.
You can read that section yourself from an 06 manual here:
http://us.lexusownersclub.com/forums...howtopic=25999
Page 309 specifically in that years manual (or in that PDF)
You can read that section yourself from an 06 manual here:
http://us.lexusownersclub.com/forums...howtopic=25999
Page 309 specifically in that years manual (or in that PDF)
#117
Lexus Fanatic
iTrader: (1)
Did you look at page 309 in the PDF I linked you to? It shows the location of both bolts A and B and that you need to adjust both the same number of turns for each headlight.
IIRC for the second one you'll only see the hole to put the screwdriver into, not the bolt itself.
IIRC for the second one you'll only see the hole to put the screwdriver into, not the bolt itself.
#119
I am still confused with the clockwise, counterclockwise thing.
If I want to move up the light, do i turn the screw driver counter clockwise to make the screw clockwise. Or the other way?
If I want to move up the light, do i turn the screw driver counter clockwise to make the screw clockwise. Or the other way?