AGGRESSIVE ISX50 wheel thread
#2072
Pole Position
iTrader: (2)
Join Date: Sep 2003
Location: Hawaii
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
sup everyone, trying to get back into a IS350.
And I originally did 18x10 +18 all around a few years ago, and was wondering has anyone done 18x10.5 all around? if so, what offset?
The offsets ill be looking at is: +15 and +22
This will be on stock body and will eventually have air suspension, but for now, it will be coil-overs.
Can i get away with a +22 all around? or should i do a +15 rear +22 front?
Any help is greatly appreciated !
And I originally did 18x10 +18 all around a few years ago, and was wondering has anyone done 18x10.5 all around? if so, what offset?
The offsets ill be looking at is: +15 and +22
This will be on stock body and will eventually have air suspension, but for now, it will be coil-overs.
Can i get away with a +22 all around? or should i do a +15 rear +22 front?
Any help is greatly appreciated !
Last edited by integlspwr; 05-21-15 at 08:32 AM.
#2073
Pole Position
iTrader: (1)
sup everyone, trying to get back into a IS350.
And I originally did 18x10 +18 all around a few years ago, and was wondering has anyone done 18x10.5 all around? if so, what offset?
The offsets ill be looking at is: +15 and +22
This will be on stock body and will eventually have air suspension, but for now, it will be coil-overs.
Can i get away with a +22 all around? or should i do a +15 rear +22 front?
Any help is greatly appreciated !
And I originally did 18x10 +18 all around a few years ago, and was wondering has anyone done 18x10.5 all around? if so, what offset?
The offsets ill be looking at is: +15 and +22
This will be on stock body and will eventually have air suspension, but for now, it will be coil-overs.
Can i get away with a +22 all around? or should i do a +15 rear +22 front?
Any help is greatly appreciated !
#2075
Driver School Candidate
Join Date: Jun 2015
Location: Hawaii
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Will I have any issues running these specs on my IS250? Do I need to roll? Camber kit? Arms?
Front: 9.5+16 2.5" lip
Rear: 10+20 3" lip
215/35
225/25
Any information would be much appreciated.
Front: 9.5+16 2.5" lip
Rear: 10+20 3" lip
215/35
225/25
Any information would be much appreciated.
#2076
Driver School Candidate
Join Date: Jun 2015
Location: Hawaii
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Front: 19x9.5 +16 2.5" lip
Rear: 19x10 +20 3" lip
215/35
225/25
And I'm riding on air for my suspension.
#2077
Driver School Candidate
Join Date: May 2014
Location: CA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
I just recently switched to air suspension and been trying to get my fitment right. When the car is aired out, the rear toe goes in, making the corners of my rear bumper grind on the lips of my rims. I tried explaining this to the alignment shop but they just set my toe to factory specs, which made the issue worse. Now I can't tuck like in the picture without taking chunks out of my rims.
I have megan toe arms and spc camber arms. Fenders rolled and pulled. Wheels specs are:
Front: 19 x 9.5 +15
Rear: 19 x 11 +12
Any pointers would be greatly appreciated, as long as I get to keep my wheels :P