Is300 running 18x10
01-25-13, 09:31 PM
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Ca
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Is300 running 18x10
Hey guys just out of curiosity would you advise running 18x10 all around what issues would I run in too if I do
01-26-13, 03:13 AM
Pole Position
Join Date: May 2011
Location: Florida
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
01-26-13, 05:01 AM
Pole Position
Join Date: Jun 2008
Location: Moorpark, CA
Posts: 315
Likes: 0
rear yes, front no
Fitting 10" in the front is possible. But I wouldn't reccomend doing so, you'll need a good amount of camber/stretch to pull it off. Not to mention the beating your fenders will take.
EDIT: nvm, if you stick with a moderate offset range +30's to +40's you can pull off 10" in the front with a decent pull and very stretched tires (215/35's)
18x10+38 all around; front: 215/35 rear: 225/40
Last edited by madchyers; 01-26-13 at 05:08 AM .
01-26-13, 08:13 AM
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Ca
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
01-26-13, 12:18 PM
Pole Position
Join Date: Jun 2008
Location: Moorpark, CA
Posts: 315
Likes: 0
Not my cup of tea, but it can be done:
same wheel/offset all around; 225/35 tire all around.
01-26-13, 09:05 PM
Driver
Join Date: Oct 2012
Location: GTA
Posts: 51
Received 0 Likes
on
0 Posts
^ seems a bit much
still looks hot though
01-27-13, 05:38 AM
Pole Position
Join Date: Jun 2008
Location: Moorpark, CA
Posts: 315
Likes: 0
There's honestly no functional reason to run a 10" front unless you're planning to drift or break necks. +25 is not break neck worthy though
01-27-13, 04:47 PM
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Ca
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Yea good call I think ill go 8.5 in front and 10 in the rear
01-27-13, 06:19 PM
Pole Position
Join Date: Jun 2008
Location: Moorpark, CA
Posts: 315
Likes: 0
That sounds much more reasonable lol. You can always use a spacer up front if you want more poke.
01-27-13, 07:18 PM
Pole Position
Join Date: May 2010
Location: AZ
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
a ols setup of mines XX 521 18x10 all around
01-27-13, 09:35 PM
Pole Position
Join Date: Jun 2008
Location: Moorpark, CA
Posts: 315
Likes: 0
rears cool, front is ehhhh
01-28-13, 10:20 AM
Driver
Join Date: Dec 2009
Location: CA
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Lexy, how are your fenders not chewed up?
01-28-13, 05:43 PM
Pole Position
Join Date: May 2010
Location: AZ
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
madchyers
rears cool, front is ehhhh
i agree with you lol. i sold the wheels the week after
01-28-13, 05:44 PM
Pole Position
Join Date: May 2010
Location: AZ
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
tonynca
Lexy, how are your fenders not chewed up?
it cleared, always good to get your fender rolled.
01-28-13, 06:36 PM
Driver
Join Date: Dec 2009
Location: CA
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
Lexy602
it cleared, always good to get your fender rolled.
Yeah it looks like it cleared but on full lock and you're going over a bump I can't imagine it would still clear!