sticking calipers upfront
#1
Lexus Test Driver
Thread Starter
Join Date: Mar 2009
Location: MD
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
sticking calipers upfront
my front pass caliper is sticking and id love 2 replace it, should i go for a used one or aftermarket ne, or even refurbished one
how hard are these to replace
anyone else had this problem
how hard are these to replace
anyone else had this problem
#3
Lexus Champion
iTrader: (1)
Join Date: Oct 2005
Location: philly
Posts: 1,925
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket = expensive
Swapping calipers from other cars (supra or LS) = costly + custom work + time
your best bet is get OEM from local junkyard
option 2 - get a used one from classifieds section if you dont mind paying shipping on a heavy 30Lb piece of metal
option 3 - bring your current one to lexus to be rebuilt... $$$
option 4 - aftermarket or caliper swap
Swapping calipers from other cars (supra or LS) = costly + custom work + time
your best bet is get OEM from local junkyard
option 2 - get a used one from classifieds section if you dont mind paying shipping on a heavy 30Lb piece of metal
option 3 - bring your current one to lexus to be rebuilt... $$$
option 4 - aftermarket or caliper swap
#4
Lexus Test Driver
Thread Starter
Join Date: Mar 2009
Location: MD
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
i went to salvo auto parts and ordered a 1 cardone rebuilt one, w core swap
well my car does have 160k so no warranty and no i dont track it so oem spec would be just perfect
also will i have to bleed the brakes?
well my car does have 160k so no warranty and no i dont track it so oem spec would be just perfect
also will i have to bleed the brakes?
#7
Driver School Candidate
Join Date: Sep 2012
Location: La
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I believe my pass front caliperis sticking as well
. Changed the pads but don't recall using any grease on the pins ... so could this be the problem or more likely its the caliper itself (piston verses bolts/slide pins)
. Changed the pads but don't recall using any grease on the pins ... so could this be the problem or more likely its the caliper itself (piston verses bolts/slide pins)
Trending Topics
#8
I'd just take it back apart and look at the slidey pins. I worked on a GS the other day, same brakes as the IS and the lower slidey pin took a slip hammer to get loose. Water got in behind the boot and it rusted up.
#9
Maintenance Moderator
iTrader: (2)
Three options for stick brakes:
1: slide pins not sliding: (usually shows as severe uneven pad wear inside vs outside pad) solution - remove, clean and lubricate; remove replace and lubricate; or if it is frozen badly, replace the caliper mounting bracket
2: sticky caliper pistons: (cant compress pistons, even with bleeder open) solution - replace or rebuild
3: bad brake line (allows fluid to compress brakes but not release, diagnose by trying to compress caliper pistons and if they won't compress at all to start but if you open bleeder, they do compress, brake line is bad): solution - replace brake line
1: slide pins not sliding: (usually shows as severe uneven pad wear inside vs outside pad) solution - remove, clean and lubricate; remove replace and lubricate; or if it is frozen badly, replace the caliper mounting bracket
2: sticky caliper pistons: (cant compress pistons, even with bleeder open) solution - replace or rebuild
3: bad brake line (allows fluid to compress brakes but not release, diagnose by trying to compress caliper pistons and if they won't compress at all to start but if you open bleeder, they do compress, brake line is bad): solution - replace brake line
Thread
Thread Starter
Forum
Replies
Last Post