20x9 +35, 20x10.5 +30 fit 3GS RWD?
#1
20x9 +35, 20x10.5 +30 fit 3GS RWD?
Hi,
I really need some advice on wheel size before making a purchase, any advise is welcome.
Will 20x9 +35(or is +25 possible?) with 245-35, 20x10.5 +30 with 275-30 fit 2007 GS RWD with just fender rolled? And I might drop the car about an inch all around just enough to have a nice stance but still deciding whether to leave it at stock height. Will it look nice with stock height? Will there be any rubbing issues? Especially when turning steering wheel lock to lock. Any comfy would be compromised?
Oh, and the wheels I'm looking to get is a 10 spokes Ace Convex titanium. Here's a link:
http://www.acealloywheel.com/BMW-M-N...er_1_1037.html
Thank You
I really need some advice on wheel size before making a purchase, any advise is welcome.
Will 20x9 +35(or is +25 possible?) with 245-35, 20x10.5 +30 with 275-30 fit 2007 GS RWD with just fender rolled? And I might drop the car about an inch all around just enough to have a nice stance but still deciding whether to leave it at stock height. Will it look nice with stock height? Will there be any rubbing issues? Especially when turning steering wheel lock to lock. Any comfy would be compromised?
Oh, and the wheels I'm looking to get is a 10 spokes Ace Convex titanium. Here's a link:
http://www.acealloywheel.com/BMW-M-N...er_1_1037.html
Thank You
#4
Former Sponsor
#6
Lexus Champion
iTrader: (20)
No problem.... i just picked me up a set of VVS-086 and can't wait till spring so i can put them on.
Not unless you want to run stretched tires and high offset wheels....
Trending Topics
#8
Instructor
iTrader: (2)
i'm running 20x9 +15 up front with no mods (i do rub) and 20 x 10.5 +25 rear with rolled fenders and a very slight pull. i think if i shaved i could run +20 rear. i'm lowered on bc coils, at 27 1/4" at the midpoint of the wheel well.
so, yes, those offsets will be just fine, as others have pointed out. as well, if you roll, you will get dimples just as infamous said. i have an AWD as well, so my drop was well over 2".
so, yes, those offsets will be just fine, as others have pointed out. as well, if you roll, you will get dimples just as infamous said. i have an AWD as well, so my drop was well over 2".
#10
Instructor
iTrader: (2)
BC coils are nice. i have close to 80k on them. you will get dimples if you roll your rear fenders. this is due to the fenders going from 2 layers of metal to 1 in the middle of the fender. the dimple occurs right at that point where there is a difference in thickness. i think i am running 225 35 and 265 30.
The following users liked this post:
bebe85 (05-12-20)
#14
Lexus Champion
iTrader: (2)
http://www.flickr.com/photos/57988545@N08/6183915290/http://www.flickr.com/photos/57988545@N08/6183915290/ by http://www.flickr.com/people/57988545@N08/, on Flickr
http://www.flickr.com/photos/57988545@N08/6183913928/http://www.flickr.com/photos/57988545@N08/6183913928/ by http://www.flickr.com/people/57988545@N08/, on Flickr
http://www.flickr.com/photos/57988545@N08/6523074105/http://www.flickr.com/photos/57988545@N08/6523074105/ by http://www.flickr.com/people/57988545@N08/, on Flickr
http://www.flickr.com/photos/57988545@N08/6152565621/http://www.flickr.com/photos/57988545@N08/6152565621/ by http://www.flickr.com/people/57988545@N08/, on Flickr