2007 Lexus gs 450h vsc, ecb, brake light
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2016
Location: Il
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2007 Lexus gs 450h vsc, ecb, brake light
I recently had my nrakes done on my 07 gs 450h and the warning brake light alomg with vsc and ecb lights on
How do I reset the brake warning light? I saw that there is a way to do so using a clip or wire in the obd connection port is this correct and if so how is it done exactly?
How do I reset the brake warning light? I saw that there is a way to do so using a clip or wire in the obd connection port is this correct and if so how is it done exactly?
#2
I recently had my nrakes done on my 07 gs 450h and the warning brake light alomg with vsc and ecb lights on
How do I reset the brake warning light? I saw that there is a way to do so using a clip or wire in the obd connection port is this correct and if so how is it done exactly?
How do I reset the brake warning light? I saw that there is a way to do so using a clip or wire in the obd connection port is this correct and if so how is it done exactly?
You shouldn't be seeing any lights if the brakes were changed properly. There are sensors in the wheel hubs that feed into the ABS system – it sounds like the mechanic damaged one of these sensors. If he bled the brakes, it could also be an air bubble in the brake system, but you'd have other signs if that were the case.
These lights didn't come on until after the brakes were changed, correct?
#3
Driver School Candidate
Thread Starter
Join Date: Aug 2016
Location: Il
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to CL!
You shouldn't be seeing any lights if the brakes were changed properly. There are sensors in the wheel hubs that feed into the ABS system – it sounds like the mechanic damaged one of these sensors. If he bled the brakes, it could also be an air bubble in the brake system, but you'd have other signs if that were the case.
These lights didn't come on until after the brakes were changed, correct?
You shouldn't be seeing any lights if the brakes were changed properly. There are sensors in the wheel hubs that feed into the ABS system – it sounds like the mechanic damaged one of these sensors. If he bled the brakes, it could also be an air bubble in the brake system, but you'd have other signs if that were the case.
These lights didn't come on until after the brakes were changed, correct?
#5
Lexus Champion
iTrader: (30)
yupe. use the paper clip method, i used it to reset mine. it's pretty straight forward step, i just don't remember which thread is it.
edit : try this below
edit : try this below
This is how to clear the VSC, ECB light... I just did it my 06 GS430 after changing my brake pad and the lights came on. Save me a trip to the stealership
If the code is able to be cleared, jumper connectors TC and EG (PINS 13 and 4)at the DLC 3 and press the brake 8+ times in 5 seconds. The pic and description below is just for reference and not the pins you need!
If the code is able to be cleared, jumper connectors TC and EG (PINS 13 and 4)at the DLC 3 and press the brake 8+ times in 5 seconds. The pic and description below is just for reference and not the pins you need!
Last edited by masboy; 08-30-16 at 01:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
thomasfx10
RX - 2nd Gen (2004-2009)
2
03-23-15 10:05 AM
mackel53
GS - 3rd Gen (2006-2011)
1
12-14-08 12:48 PM