*Batman*

I am installing my PS Nav/Override kit on Friday. I would like to mount the switch in a way that is subtle and doesn't look out of place.

I liked this mounting position posted by another CL member for example.

https://www.clublexus.com/forums/gs-...-works-20.html

Does anyone else have any good ideas on where and how to mount?

Please share what you did.

Thx.

twylie

iTrader: (3)

This is where I located mine and it's just in there with pressure (nothing permanent) and is very inconspicuous. Easy to get to by either driver or passenger.

not my pic - lifted from the thread you linked to

rominl

iTrader: (4)

mine is the same as twylie. i have done quite a few different locations, from under the driver side dash to inside the center console, but i don't think they are accessible enough for me

*Batman*

Great suggestions. Any other ideas out there that I should consider?

J Crew

does anyone know where to get a blank that would fit where that switch is shown? i would like to add a switch in that same location but need to find a blank to router out. thanks.

*Batman*

5 dollars and change from sewell parts online.

*Batman*

Are the buttons permanently lit up like that in red and green? I would find that off-putting at night. Or are they only lit up when the TV or Nav unlock mode is active?

Has anyone seen any other good low-key installs?

twylie

iTrader: (3)

only lit up at start up (briefly) and then when activated.

rominl

iTrader: (4)

yeah they aren't lid unless you are using them

if you want low key locations i guess inside center console is the best place already

J Crew

i tried to find them on sewell, but couldn't. do you have a link or part number?

also, i agree that inside the center console would be the most low key place.

*Batman*

http://www.sewellpartsonline.com/par...d=107190&nbc=Y

*Batman*

Thanks for the tips. I think I will try to do it the way shown in the original pic. If I put it inside the armrest compartment then it won't be readily accessible. Placing it next to the ECT and AVS switches is both convenient and low-key with the factory blank mount.

rominl

iTrader: (4)

hope it works out and post pictures

GS07Cali

Does anyone know a good installer in So. Ca. as I am interested in purchasing the PS kit and the Vais aux adapter kits. Just not comfortable with the DiY skills. Also if you know what the cost would run by having an installer do it. Thanks for your replies

Stormforge

you can buy the PS kit directly from prestigious society. their website is:

www.prestigioussociety.com


and you can buy the vais kit from this guy i know. send email to info@prestigiousdetailing.com for a price quote (fyi not related to prestigious society). and this guy can install both the ps and vais kit too. tell him that patrick sent you.