3GS wheel thread
#1321
Pole Position
iTrader: (2)
Join Date: Oct 2007
Location: MN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Are the offsets correct? What's the wheel design like? You should have all kinds of clearance with a +30 since it's pushing the face farther away from the hub. I put my 20x10 +30 up front and I had plenty of clearance.
#1322
I got in contact with a fellow member and was suggesting a 10mm wheel spacer up front, but i tried a 8mm and still did not clear. Also even tried my +20 up fronts and it sits on the hub, but still against the caliper and scrapes against the inside of my wheel. I hate doing the math and i believe i would be ok with a 12mm spacer?
#1323
So who's running 11 width on the rear?
I need to order a set for daily/aggressive fitment. I'm curious if a 11 +30 with 265/30/19 & -4 camber will clear the inner strut?
I'll start digging around...
I need to order a set for daily/aggressive fitment. I'm curious if a 11 +30 with 265/30/19 & -4 camber will clear the inner strut?
I'll start digging around...
#1326
Decided to just rock Vossens as my wheels for now.. Vossen CVT in 19x8.5 / 19x10. I did not get the standard Lexus offsets, but rather the more aggressive offsets that were meant for the Nissan 350z/370z. Ran 235/35/19 / 265/30/19 Toyo T1 Sport tires.
I also switched out the Teins I had for some BC Racing coilovers.
I'm loving the look.
I also switched out the Teins I had for some BC Racing coilovers.
I'm loving the look.
#1327
Decided to just rock Vossens as my wheels for now.. Vossen CVT in 19x8.5 / 19x10. I did not get the standard Lexus offsets, but rather the more aggressive offsets that were meant for the Nissan 350z/370z. Ran 235/35/19 / 265/30/19 Toyo T1 Sport tires.
I also switched out the Teins I had for some BC Racing coilovers.
I'm loving the look.
I also switched out the Teins I had for some BC Racing coilovers.
I'm loving the look.
#1328
#1329
#1331
#1332
My front fenders are shaved just like my rears. No rub My front is actually lower now to even out with the rear.
Thank you sir!
265/30/19 Toyo T1 Sport on 19x10 +20 cleanly tucked Almost zero stretch..
I have both of the Megan Racing Upper Camber Arms & the Toe Arm.
Yes, I had my front and rear fenders shaved, no rubbing issues.
Thank you sir!
I have both of the Megan Racing Upper Camber Arms & the Toe Arm.
Yes, I had my front and rear fenders shaved, no rubbing issues.
#1334
My front fenders are shaved just like my rears. No rub My front is actually lower now to even out with the rear.
Thank you sir!
265/30/19 Toyo T1 Sport on 19x10 +20 cleanly tucked Almost zero stretch..
I have both of the Megan Racing Upper Camber Arms & the Toe Arm.
Yes, I had my front and rear fenders shaved, no rubbing issues.
Thank you sir!
265/30/19 Toyo T1 Sport on 19x10 +20 cleanly tucked Almost zero stretch..
I have both of the Megan Racing Upper Camber Arms & the Toe Arm.
Yes, I had my front and rear fenders shaved, no rubbing issues.
#1335
Thanks for the positive feedback.. I'll get more photos up this wee/weekend !