3GS wheel thread
#1306
#1307
damn, I just got my wheels and my specs are 20x10. +30 fronts , +20 rears. lowered on BC coils. Haven't installed my wheels yet, waiting my tires.
#1308
https://www.clublexus.com/forums/gs-...-on-3gs-5.html
#1311
235/35/20. I got this idea from a tire suggestion through a member on here. That's what he is running and he has no issue. I did a lot of research and a lot of people that are running 245/30 or 245/35 are getting issue of rubbing on full turns and reversing I guess.
#1314
#1315
#1317
Thanks
#1318
Hi guys, i was so excited to finally get my tires mounted onto my wheels. My specs are 20x10 et+30 +20 (rears). But i knew i wouldnt be that excited for long,
I went to go put the +30 upfront and it doesn't even sit on my hub, maybe only on 3 studs. I had my +20s up front just to see and it sits on the hub but scraps against the caliper. So i went to autozone, and got the cheap 5 lug 5/16 spacer and it sits fine, but it still looks very tight.. I called the vendor ive been going thru for all of this and they recommend the ichiba spacers with the extended studs on there which i think will work. But i am not local to them for me to bring in my car.
I've done so much research on my wheels and i was sure these would clear, but i guess not =(*
My dilemma is what size spacers to get for the fronts
I went to go put the +30 upfront and it doesn't even sit on my hub, maybe only on 3 studs. I had my +20s up front just to see and it sits on the hub but scraps against the caliper. So i went to autozone, and got the cheap 5 lug 5/16 spacer and it sits fine, but it still looks very tight.. I called the vendor ive been going thru for all of this and they recommend the ichiba spacers with the extended studs on there which i think will work. But i am not local to them for me to bring in my car.
I've done so much research on my wheels and i was sure these would clear, but i guess not =(*
My dilemma is what size spacers to get for the fronts
#1319
Hi guys, i was so excited to finally get my tires mounted onto my wheels. My specs are 20x10 et+30 +20 (rears). But i knew i wouldnt be that excited for long,
I went to go put the +30 upfront and it doesn't even sit on my hub, maybe only on 3 studs. I had my +20s up front just to see and it sits on the hub but scraps against the caliper. So i went to autozone, and got the cheap 5 lug 5/16 spacer and it sits fine, but it still looks very tight.. I called the vendor ive been going thru for all of this and they recommend the ichiba spacers with the extended studs on there which i think will work. But i am not local to them for me to bring in my car.
I've done so much research on my wheels and i was sure these would clear, but i guess not =(*
My dilemma is what size spacers to get for the fronts
I went to go put the +30 upfront and it doesn't even sit on my hub, maybe only on 3 studs. I had my +20s up front just to see and it sits on the hub but scraps against the caliper. So i went to autozone, and got the cheap 5 lug 5/16 spacer and it sits fine, but it still looks very tight.. I called the vendor ive been going thru for all of this and they recommend the ichiba spacers with the extended studs on there which i think will work. But i am not local to them for me to bring in my car.
I've done so much research on my wheels and i was sure these would clear, but i guess not =(*
My dilemma is what size spacers to get for the fronts
#1320