VIAS Install '3rd Gen GS Edition'
#46
Really? For some reason those buttons arent working for me...we're talking about the same buttons , correct? I'm referring to first picture in this thread (buttons next to casette adp) - they don't seem to work for me..
Last edited by bhuwan; 12-23-06 at 05:25 PM. Reason: attached pic
#47
OK, SLI unit went in tonight... so far, works pretty nice. Had to fiddle with the programming to get the unit into the "Cd-MD" player mode, and then had to enter Simple Mode and hit the right buttons to get the Navigation "I Agree" dismissal to work.... all in all, it works well and I am very happy.... need to fiddle with my playlists now to get it the way I want it, but that's NBD.
Thanks again for the detailed instructions with pics.... they were right in my hands while I did the install... very helpful.
Man, having that need to press "I Agree" gone is great!
Thanks again for the detailed instructions with pics.... they were right in my hands while I did the install... very helpful.
Man, having that need to press "I Agree" gone is great!
#48
Pole Position
Thread Starter
Yup, those work for me, as well as on screen buttons.. anyone else having this problem ?
#49
I'm going to try and reprogram it once I put it back in;
For some reason, it shows "MD CHANGER" as the mode when playing the iPOD, even though I programmed it as a CD Changer...
#50
Driver School Candidate
Ron,
Thanks for the great instructions and pictures. Did my SLI install yesterday in my GS450H with ML and Nav. But no way that the unit fit where your's did. I don't know if there's extra cabling in the hybrid or not, but no way would it fit.
So for now, I have the unit in the console storage compartment while I consider other options.
Jeff
Thanks for the great instructions and pictures. Did my SLI install yesterday in my GS450H with ML and Nav. But no way that the unit fit where your's did. I don't know if there's extra cabling in the hybrid or not, but no way would it fit.
So for now, I have the unit in the console storage compartment while I consider other options.
Jeff
#51
Ron,
Thanks for the great instructions and pictures. Did my SLI install yesterday in my GS450H with ML and Nav. But no way that the unit fit where your's did. I don't know if there's extra cabling in the hybrid or not, but no way would it fit.
So for now, I have the unit in the console storage compartment while I consider other options.
Jeff
Thanks for the great instructions and pictures. Did my SLI install yesterday in my GS450H with ML and Nav. But no way that the unit fit where your's did. I don't know if there's extra cabling in the hybrid or not, but no way would it fit.
So for now, I have the unit in the console storage compartment while I consider other options.
Jeff
#52
Driver School Candidate
#53
Sorry -- let me start by asking - didyou put it in the center console (same location kuch123 put the iPOD)?
#54
Driver School Candidate
#56
Guys, I got the SLI installed just like Ron shows in his pics in the first post. Just make sure to orient the unit so that the audio cable wires point towards the trunk and the stereo harness points towards the engine.... it fits well, is very snug, doesn't rattle or need tape to hold it in place. Mine is RWD, so not sure this works well for AWD models....
Just takes a little patience.... it will fit and all the trim goes back into place nicely.
#57
Pole Position
Thread Starter
Guys, I got the SLI installed just like Ron shows in his pics in the first post. Just make sure to orient the unit so that the audio cable wires point towards the trunk and the stereo harness points towards the engine.... it fits well, is very snug, doesn't rattle or need tape to hold it in place. Mine is RWD, so not sure this works well for AWD models....
Just takes a little patience.... it will fit and all the trim goes back into place nicely.
Awesome! mine IS AWD.. so it obviously fits as well, probably just took a little MORE patience for me
#58
Sadly, my SLI is going b ack tomorow, Vais Tech thinks it may be defective (I programmed it as CD mode but the nav head shows MD).
#59
to get it to work and show the song titles. It basically operates in CD Changer mode according to the LCD readout on the stereo. I hope you get your unit back soon...