When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The foam shock absorber doesn't fit with the rear bumper, have him sand down and spray the metal behind the opening with some flat black or something too or the rust will show through behind the mesh. Might've thought of that already but worth mentioning!
Thanks for the heads up Kyle.. but yea the shop has already prepped it to show through.
Originally Posted by tmf2004
so the rear bumper has issues fitting the GS.. is this authentic?
Yep.. it has the L-Sportline logo molded into the abs on all 4 pieces of the kit.
Originally Posted by Rock-a-Lex
Correct, need to make holes in front bumper for fogs. My rear bumper still fits with the white energy foam. I got the car back and everything fit well but the dumb white foam was showing through the mesh slot in the rear bumper. So, I masked it off and re-sprayed the mesh with gloss black spray paint making sure the white foam got completely covered with the black. It turned out perfect and stayed nice. Had the kit on now for almost 5 yrs.
Thanks Rock.. yea the rear bumper also did not have the holed pre-drilled for the fasteners under the bumper. My shop had to drill them to make sure the bumper was secured under there.
If you don't, pass the info on to others here Tony, its a super sweet kit.. and one of the only ABS plastic ones ever made!
Originally Posted by ThomasGS4
Tony if you don't buy it, I will come through this computer and smack you.
i got the kit guys relax lol....
all parts are authentic.. and the previous owner had fogs screwed into bumper.. There;s also a notch on the opposite side just like the stock bumper where the fog light slides into..I promised another member the rear bumper but i made out with the front and sides... i can always get the Sorona down the road but trust me this was a deal...