Rebuild in progress
#17
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: FL
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
N luxury u gotta give respect to get it!!! U dont just come n n make a broad statement n not elaborate!!! He came n trying to make the post what it is now!!! Garbage!!!!
#18
Lexus Test Driver
iTrader: (19)
Working on the head light Assembly now and I'm running into a problem because I think there is a bolt behind the wheel well covers....... Am I correct??? If so how do I get the covers off w/ out breaking the clips??? Not really clips but plastic screw with the inserts u push in to expand the ends!
#20
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: FL
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I don't know where my wtf thread went! Its not even on my user posts page!!! Believe it or not somebody reffered my to where I got my motor on that thread n now its gone!!!!
#21
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: FL
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Hahaha on the gangsta pic!!!! As for the hostility there is non..... I'm moving n 1 direction...... forward it was said to me it had to b done by multiple people so that's what I'm doing....... either way its getting done!
#22
Lexus Fanatic
iTrader: (182)
Yup
https://www.clublexus.com/forums/gs-...400-motor.html
It's not gone...you just didn't look. I linked it.
Btw before going through all the trouble of removing the headlights and front clip. Why not drop the motor out from underneath the car. Much cleaner and easier. Jack up the car and unbolt and leave the rest to gravity. Easy as pie my friend
https://www.clublexus.com/forums/gs-...400-motor.html
Btw before going through all the trouble of removing the headlights and front clip. Why not drop the motor out from underneath the car. Much cleaner and easier. Jack up the car and unbolt and leave the rest to gravity. Easy as pie my friend
#25
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: FL
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
We are doing this on ramps n my garage. Car sits very low would there b enough clearance? He's ( my mechanic) is getting pretty old upper fifties so I really font think he wants to work from his back all that much. N all actuality I would love to take it 2 a shop n put it on a lift n do it but I was getting crazy quotes!!! Nobody around here really wanted to touch it n no way was I taking it to Lexus or Toyota!
#28
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: FL
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
N he's been here the past 2 days I really didn't want to bother him again with petty questions over and over! Figured i d ask u guys n here's where we r!!! Talking about crap that's irrelevant.... I wanted to know how to get the clips off ...... check..... is the a bolt behind the wheel well for the head light assembly..... no anwser!
#29
Lexus Test Driver
iTrader: (19)
Well since you think my previous information was invalid, here's a good tip of advice; the driveshafts are extremely difficult to remove while still in the car, so when you drop the engine/tranny from underneath, it's usually best to drop the driveshaft and differential. Your mechanic will say the same thing.
#30
Forum Administrator
iTrader: (2)
Take a read of the sense of community sticky at the top of this forum and PM me to discuss how you would do things differently in this thread from post #3 onward.
https://www.clublexus.com/forums/gs-...-gs-forum.html
Thread
Thread Starter
Forum
Replies
Last Post
AndreasMet
LS - 3rd Gen (2001-2006)
55
08-13-14 01:29 PM
dewinks
ES - 1st to 4th Gen (1990-2006)
8
02-01-14 06:25 AM