Knock Sensor Wire Harness question...searched everywhere need some help
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2011
Location: MD
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Knock Sensor Wire Harness question...searched everywhere need some help
Good Evening everyone, writing today to try to find the part number for the wire harness for the knock sensors. I have replaced both of mine this weekend courtesy of info from here, did it in 2 hours :-) but the CEL light came back on, diagnosed it (I work for Toyota btw just starting student of t-ten) and my parts guys are not so nice about helping with crossing over lexus and toyota parts, I called the local lexus dealership and told him I work for a dealership and he's acting funny and didn't even wanna talk about the pig tail wire (go figure) so here I am tired, exhausted mentally trying to get the part number for the knock sensor wire harness, btw the toyota cross over number for the knock sensor is 89615-30080, if anyone should ever need it...and as said on here before replace both of them regardless of PO325 or PO 330 or you'll be in the same jam as I am..thanks in advanced club lexus..
#4
Good Evening everyone, writing today to try to find the part number for the wire harness for the knock sensors. I have replaced both of mine this weekend courtesy of info from here, did it in 2 hours :-) but the CEL light came back on, diagnosed it (I work for Toyota btw just starting student of t-ten) and my parts guys are not so nice about helping with crossing over lexus and toyota parts, I called the local lexus dealership and told him I work for a dealership and he's acting funny and didn't even wanna talk about the pig tail wire (go figure) so here I am tired, exhausted mentally trying to get the part number for the knock sensor wire harness, btw the toyota cross over number for the knock sensor is 89615-30080, if anyone should ever need it...and as said on here before replace both of them regardless of PO325 or PO 330 or you'll be in the same jam as I am..thanks in advanced club lexus..
good luck trying to find the actual connector. also did you trace the wire down and to a continuity check, are you sure the connector is the problem.
#6
Driver School Candidate
Thread Starter
Join Date: Feb 2011
Location: MD
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I think that's what i'm gonna have to do, I'll take to my shops' master tech and see what he says about it, he might have some feed back about this too...But thanks for all you guys help
Trending Topics
#8
Driver School Candidate
Thread Starter
Join Date: Feb 2011
Location: MD
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
#9
Driver School Candidate
Join Date: Dec 2018
Location: Fl
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Did you ever got fixed cause I am having same problem, did you ever find the part
Good Evening everyone, writing today to try to find the part number for the wire harness for the knock sensors. I have replaced both of mine this weekend courtesy of info from here, did it in 2 hours :-) but the CEL light came back on, diagnosed it (I work for Toyota btw just starting student of t-ten) and my parts guys are not so nice about helping with crossing over lexus and toyota parts, I called the local lexus dealership and told him I work for a dealership and he's acting funny and didn't even wanna talk about the pig tail wire (go figure) so here I am tired, exhausted mentally trying to get the part number for the knock sensor wire harness, btw the toyota cross over number for the knock sensor is 89615-30080, if anyone should ever need it...and as said on here before replace both of them regardless of PO325 or PO 330 or you'll be in the same jam as I am..thanks in advanced club lexus..
#10
Driver School Candidate
Join Date: Dec 2018
Location: Fl
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
J_LS
GS - 2nd Gen (1998-2005)
1
05-11-09 12:44 PM