Member's wheel setup gallery
07-09-09, 12:30 AM
#33
Lexus Test Driver
![[ant]'s Avatar](https://www.clublexus.com/forums/customavatars/avatar87633_1.gif){kind=avatar}
Join Date: May 2008
Location: australia
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
i just thought too it'd also be nice for people with Air to show Drive Height and Aired Out height. Because you can get some pretty agro offsets on with air because of how the wheels tuck when you lay it out, but then at ride height the wheels jut back out and become a bit mexican sometimes. So it would be good for people to see how it looks day to day as well as in 'show mode' !
07-09-09, 10:46 AM
#35
Pole Position
iTrader: (4)
Join Date: Sep 2004
Location: Herndon, Virginia
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Guys if you have questions about the setup, PM the person! This thread isn't going to get sticky'd if we keep mucking it up with questions and comments ( I know I'm not following my own guidance here....) 
.
Leave it to posting your just your setup so we don't have to wade through all the crap.
.Leave it to posting your just your setup so we don't have to wade through all the crap.
07-09-09, 10:59 AM
#36
how about u post your set up then go from there aite.... i dont think this would become a sticky because for 1... the no one has bother to post up any of their specs for 3 pages 6 so far i didnt count....and 2 Picture REQUEST. Non-Air Tucked Wheels
havent been sticky with 88k views yet soooooooooooooo i doubt that this will be 1 of them but yeah imma shut up for now haha....
havent been sticky with 88k views yet soooooooooooooo i doubt that this will be 1 of them but yeah imma shut up for now haha....
07-09-09, 10:26 PM
#40
Wheel Make/Model: XXR 009(installed 7-9-09, removed 20's and lowered this sucka back down!)
Wheel Size (F/R): 19x9.5"(R)(3" lip) 19x9"(F)(2" lip)
Wheel Offset (F/R): +35 both
Tire Size (F/R):235/35/19---265/30/19
Ride height from middle fender (F/R) : don't know....low tho!
Suspension:Tom's Racing Advox
Camber (F/R) :no in front-- is "yes" an answer....lol
Toe (F/R) : all good
Fender Mods: cut slightly in front, cut A LOT in rear
Spacers:nope
sorry for crappy pics.....cars dirty, camera lens was dirty....and so on. Anodized red lug nuts coming soon. Center caps are being powder coated black as of now.
Wheel Size (F/R): 19x9.5"(R)(3" lip) 19x9"(F)(2" lip)
Wheel Offset (F/R): +35 both
Tire Size (F/R):235/35/19---265/30/19
Ride height from middle fender (F/R) : don't know....low tho!
Suspension:Tom's Racing Advox
Camber (F/R) :no in front-- is "yes" an answer....lol
Toe (F/R) : all good
Fender Mods: cut slightly in front, cut A LOT in rear
Spacers:nope
sorry for crappy pics.....cars dirty, camera lens was dirty....and so on. Anodized red lug nuts coming soon. Center caps are being powder coated black as of now.
Last edited by 99Aristo; 07-09-09 at 10:29 PM.
07-28-09, 12:48 PM
#42
Rota DPT 18X9 +42 No Rub No Fender Mods
Wheel Make/Model:Rota DPT (Flat Steel)
Wheel Size (F/R):18X9 all four
Wheel Offset (F/R):+42mm all four
Tire Size (F/R):245/40/18 & 275/35/18
Ride height from middle fender (F/R) : Huge ... were talkin' Monster Truck Gap
Suspension:Stock (for now)
Camber (F/R) :
Toe (F/R) :
Fender Mods:None
Spacers:None
Wheel Size (F/R):18X9 all four
Wheel Offset (F/R):+42mm all four
Tire Size (F/R):245/40/18 & 275/35/18
Ride height from middle fender (F/R) : Huge ... were talkin' Monster Truck Gap
Suspension:Stock (for now)
Camber (F/R) :
Toe (F/R) :
Fender Mods:None
Spacers:None
07-28-09, 01:09 PM
#43
Wheel Make/Model: MRR GT1's chrome
Wheel Size (F/R): 20x8.5 / 20x10
Wheel Offset (F/R): +35(+30) / +43(+18)
Tire Size (F/R): 245/30/20 / 275/30/20
Ride height from middle fender (F/R) : 25.5in / 26in
Suspension: Tein SS coils, Exact Motorsport Camber spacers / SPC rear camber bolt
Camber (F/R) : -1.75 / -1.25
Toe (F/R) : +0.10 / -0.08
Fender Mods: fenders rolled front and rear
Spacers: +5mm for front and +25mm for rear
Winter setup
Wheel Make/Model: Sora'T
Wheel Size (F/R): 17x8 / 17x8
Wheel Offset (F/R): +25(+20) / +20(+0)
Tire Size (F/R): 235/45/17 / 235/45/17
Spacers: +5mm for front and +25mm for rear
Wheel Size (F/R): 20x8.5 / 20x10
Wheel Offset (F/R): +35(+30) / +43(+18)
Tire Size (F/R): 245/30/20 / 275/30/20
Ride height from middle fender (F/R) : 25.5in / 26in
Suspension: Tein SS coils, Exact Motorsport Camber spacers / SPC rear camber bolt
Camber (F/R) : -1.75 / -1.25
Toe (F/R) : +0.10 / -0.08
Fender Mods: fenders rolled front and rear
Spacers: +5mm for front and +25mm for rear
Winter setup
Wheel Make/Model: Sora'T
Wheel Size (F/R): 17x8 / 17x8
Wheel Offset (F/R): +25(+20) / +20(+0)
Tire Size (F/R): 235/45/17 / 235/45/17
Spacers: +5mm for front and +25mm for rear
08-31-09, 09:49 PM
#45
hey insomniac, cuz i was curious, i tried running the +15mm spacers up front, they work, rubb like crazy (on fender liner) but they work.
talked to jun, he said i could always just cut away at the fender liner, and cut the fender a bit (i rolled mine but the fronts aren't exactly flat)
so i think max for 8.5's are about +20 for the fronts with under -2 degree camber.
talked to jun, he said i could always just cut away at the fender liner, and cut the fender a bit (i rolled mine but the fronts aren't exactly flat)
so i think max for 8.5's are about +20 for the fronts with under -2 degree camber.