When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
yup the previous posting asked for the widest and most aggressive offsets, so that I could put my own custom wheels on. I decided against crazy widths, although they were never really an option to begin with.
Thanks, this car really looks good with concave wheels.
Sumitumo
245/35/20
285/30/20
Note that a 275/30/20 Sumitumo tire will only stretch, not go to the end of the wheel. the 285 BARELY makes it there. I will try a different brand later, but these are REALLY quiet and have loads of traction for the price point.
Yep ran this last summer, you must be rubbing a little, I was last summer. I used bridgestone tires and it was at the end perfect fit but rubbed. Probably because I never rolled the fenders
Yep ran this last summer, you must be rubbing a little, I was last summer. I used bridgestone tires and it was at the end perfect fit but rubbed. Probably because I never rolled the fenders
Well my fitment is not quite as wide as most people in here as previously stated. My offsets are not quite as low as those people that have those 9 inch fronts and 10.5 rears either.
If you base that I rub off of my tire sizes you are mistaken. I just looked under there today, there's no indication of rubbing. I'll check both sides again.