1993 GS300 w58 swap A/T ECU
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: California
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
1993 GS300 w58 swap A/T ECU
I am planning on doing a W58 swap with A/T ECU, I have heard that this will cause CEL codes because the ecu doesn't see a trans. Is there some sort of work around that will allow me to use the A/T ECU and not have it trip the CEL? I live in CA so I have to worry about this because of the smog checks.
thanks for any help.
thanks for any help.
#3
Racer
Yea I have no problems running a R154 and my stock A/T ecu for the gs300. Check my thread for how I wired it
#6
Racer
Yes. This is correct.
Trending Topics
#8
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: California
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Awesome. This means I won't have to try and get an auto Ecu. So the only wiring involved is the neutral switch, reverse lights, and speed sensor right?
#9
Racer
Speed sensor is already wired, just unplug and replug
Thread
Thread Starter
Forum
Replies
Last Post