Ebay lips fit non f-sport bumper?
#1
Driver School Candidate
Thread Starter
Ebay lips fit non f-sport bumper?
Will ebay lip listed for just f-sport bumper fit a non f-sport ? I looked and it seem like the same on bottom. Hardly can tell the difference between non f-sport and f-sport bumper.
Looking at these
http://www.ebay.com/itm/L-Style-Fron...hVd5zF&vxp=mtr
http://www.ebay.com/itm/SK-Style-Fro...VT~nSx&vxp=mtr
Any help would be greatly appreciated
.
Looking at these
http://www.ebay.com/itm/L-Style-Fron...hVd5zF&vxp=mtr
http://www.ebay.com/itm/SK-Style-Fro...VT~nSx&vxp=mtr
Any help would be greatly appreciated
.
#4
Intermediate
iTrader: (1)
Actually there was one member here that test fitted the fsport ebay lip to his non fsport. According to him, the sides fit perfectly. The only thing was the mid section didn't sit flush to the bumper and lip as seen in the picture. Here is the picture I've got. I was thinking the l-style ebay lip might be a better fit since it doesn't look like it has the raised contours (to mold with the fsport mid bumper section) as the ebay non-l-style lip.
#5
Driver School Candidate
Thread Starter
same here, I am thinking about getting the L style one and try to fab it to fit if needed. Anyone got input on that? the middle section is just raised a little right?
#7
Yes it does fit 80% the other 20 is the center part that needs to be trimmed to give it that oem fitment and sit flush i will mess around with it and get back to you on this...I was trying to sell it but if no one buys it I'll keep it and make it a test model.@viperr thanks buddy
Trending Topics
#8
Intermediate
iTrader: (1)
Yes it does fit 80% the other 20 is the center part that needs to be trimmed to give it that oem fitment and sit flush i will mess around with it and get back to you on this...I was trying to sell it but if no one buys it I'll keep it and make it a test model.@viperr thanks buddy
I wouldn't rely on tape as I would add additional nuts and bolts/screws (or use any of the existing oem holes under the bumper and drill new ones in the lip to line it up) to mount the lip.
#12
Intermediate
iTrader: (1)
Going back to the L-style lip fitment, I believe this might just work with minimal adjustment after looking at the pictures. From when bootinsc did the test fitment of the SKP style lip, it seems that the only issue was the mid section which for this lip is highly contoured to mold into f-sport bumper. The L-style lip has a more flat and minimal contoured design which leads me to believe that there wouldn't be the big gap that the SKP style caused for the test fitment. With that being said, I plan on taking this project on with the L-style lip in the next month or so...just thought I'd share my 2 cents for now.
The following users liked this post:
AJLex19 (02-16-17)
#13
Going back to the L-style lip fitment, I believe this might just work with minimal adjustment after looking at the pictures. From when bootinsc did the test fitment of the SKP style lip, it seems that the only issue was the mid section which for this lip is highly contoured to mold into f-sport bumper. The L-style lip has a more flat and minimal contoured design which leads me to believe that there wouldn't be the big gap that the SKP style caused for the test fitment. With that being said, I plan on taking this project on with the L-style lip in the next month or so...just thought I'd share my 2 cents for now.
#14
Lead Lap
Going back to the L-style lip fitment, I believe this might just work with minimal adjustment after looking at the pictures. From when bootinsc did the test fitment of the SKP style lip, it seems that the only issue was the mid section which for this lip is highly contoured to mold into f-sport bumper. The L-style lip has a more flat and minimal contoured design which leads me to believe that there wouldn't be the big gap that the SKP style caused for the test fitment. With that being said, I plan on taking this project on with the L-style lip in the next month or so...just thought I'd share my 2 cents for now.
I did look carefully at the pics of a GS F-Sport and a non-F Sport to see the curvature difference and it is minimal however not sure how the mounting portion will work considering those differences. There aren't that many "affordable" lip kits for the non-F sport bumper out there...Hope to hear from you about the results of your test soon