GS - 4th Gen (2013-2020) Discussion about the 2013 and up GS models

odb2 port issues

Thread Tools
 
Search this Thread
 
Old 07-11-15, 11:03 AM
  #1  
mitnick
Driver School Candidate
Thread Starter
 
mitnick's Avatar
 
Join Date: Nov 2007
Location: MD
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default odb2 port issues

I have a 2014 GS350 F-Sport and wanted to ask if anyone else is having issues with their odb2 port.

So I have a odb2 scanner that I have been using on my other cars but when I plug it into my 2014 gs, it doesn't even turn on. I took it to the nearest dealership to have them test it out and they were able to connect it using toyota/lexus computer through odb2 port....

My odb2 scanner is from 2006... is there a different version of odb2 scanner that I need to get?
Old 07-11-15, 11:19 AM
  #2  
2GSKaizen
Lead Lap
iTrader: (1)
 
2GSKaizen's Avatar
 
Join Date: Jun 2012
Location: Nebraska
Posts: 459
Likes: 0
Received 2 Likes on 2 Posts
Default

That is pretty strange, but since the Toyota scan tool worked that means your port is ok. I would look at the plug on the end of your scanner. Make sure you don't have any bent pins on your plug. Sounds like it isn't getting power at all.
Old 07-11-15, 11:32 AM
  #3  
KJD3
Driver
 
KJD3's Avatar
 
Join Date: Sep 2014
Location: Kentucky
Posts: 184
Likes: 0
Received 0 Likes on 0 Posts
Default odb2 port issues

You might have a bent pin. Mine works on my 15 GS, 11 G37S, 08 Crown Vic, 01 C230, 05 Jetta, and 10 Passat.
Old 07-11-15, 12:42 PM
  #4  
RyanC
Driver
iTrader: (1)
 
RyanC's Avatar
 
Join Date: Jan 2012
Location: VA
Posts: 170
Likes: 0
Received 3 Likes on 2 Posts
Default

I have a bluetooth OBD2 device and hook it up to my 2014 GS350 F-Sport and it works with Torque (an Android app that reads the from the OBD2 device) just fine.
Old 07-11-15, 03:10 PM
  #5  
HUSKERnKS
Lead Lap
 
HUSKERnKS's Avatar
 
Join Date: Jan 2011
Location: South Carolina
Posts: 655
Received 108 Likes on 66 Posts
Default

Mine works as well
Old 07-12-15, 11:14 AM
  #6  
mitnick
Driver School Candidate
Thread Starter
 
mitnick's Avatar
 
Join Date: Nov 2007
Location: MD
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Hmm.... I just tested my odb2 connector on 06 is250, 08 tundra and 08 g37 and it works fine.

I thought that power pin might have been bent on my odb2 port so I put a battery in my scanner and plugged it in again but it says that I need to connect it to a odb2 port when it is already plugged in....

Can you guys tell which odb2 scanners you were able to use on your 4th Gen GS?
Old 07-12-15, 11:39 AM
  #7  
KJD3
Driver
 
KJD3's Avatar
 
Join Date: Sep 2014
Location: Kentucky
Posts: 184
Likes: 0
Received 0 Likes on 0 Posts
Default odb2 port issues

This is the one I have.

INNOVA 3130c Diagnostic Scan Tool/Code Reader with Fix Assist for OBD2 Vehicles https://www.amazon.com/dp/B008RHBJ8K..._LqROvb0TCMMTZ
Attached Thumbnails odb2 port issues-20150712_143613.jpg  
Old 07-12-15, 01:04 PM
  #8  
99alta
Intermediate
 
99alta's Avatar
 
Join Date: Oct 2014
Location: Ab.
Posts: 329
Received 4 Likes on 4 Posts
Default

Originally Posted by mitnick
Hmm.... I just tested my odb2 connector on 06 is250, 08 tundra and 08 g37 and it works fine.

I thought that power pin might have been bent on my odb2 port so I put a battery in my scanner and plugged it in again but it says that I need to connect it to a odb2 port when it is already plugged in....

Can you guys tell which odb2 scanners you were able to use on your 4th Gen GS?
Is your firmware up-datable ? May need an update.
I'm using the same on as KJD3 and mine works fine as well. Nice unit as it can track a lot of variables real time.
One day I'm going to try regular gas and see what it does to the timing, etc.
Old 07-16-15, 03:43 AM
  #9  
mitnick
Driver School Candidate
Thread Starter
 
mitnick's Avatar
 
Join Date: Nov 2007
Location: MD
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Ha.... I just purchased that scanner and plugged into my GS' ODB2 port but still nothing. As soon as I plug mine in, bunch of dash lights start to flash so I made another appointment at the dealership to have them take a look at my GS....

Thanks for all your help guys!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
newe70
GS - 4th Gen (2013-2020)
4
06-22-16 01:27 PM
RomanTPA
GS - 4th Gen (2013-2020)
12
05-29-16 11:11 PM
RyanC
GS - 4th Gen (2013-2020)
2
09-01-14 06:57 PM
chadori
GS - 4th Gen (2013-2020)
27
07-09-14 05:22 PM
jjbenzo
GS - 4th Gen (2013-2020)
68
02-23-13 12:42 PM



Quick Reply: odb2 port issues



All times are GMT -7. The time now is 01:35 AM.