Stoptech BBK
#31
2IS OG
iTrader: (21)
Of course - new hubs and discs will require a bracket. That's why I was making my guess contingent on the assumption that the brake components were caregivers from the previous model. I'm not too familiar with all the new trim levels for the 4GS - aren't there different/upgraded discs and calipers on one the models? Does the base GS350 still come with the old IS350/GS350 brakes?
Javier
Javier
#32
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,446
Received 1,058 Likes
on
586 Posts
Of course - new hubs and discs will require a bracket. That's why I was making my guess contingent on the assumption that the brake components were caregivers from the previous model. I'm not too familiar with all the new trim levels for the 4GS - aren't there different/upgraded discs and calipers on one the models? Does the base GS350 still come with the old IS350/GS350 brakes?
Javier
Javier
However, both the Base GS350 & F-Sport now use 2 piece disc rotors up front..
The F-Sport RWD does get a slightly larger caliper & disc combo up front only.
Base GS350 - (2 piece disc hidden)
GS350 F-Sport (RWD ONLY)
Joe Z
#35
Lexus Test Driver
Thread Starter
I was suppose to get it done this weekend, but since my wheels not gonna be here until the 27 th, so my brake install is gonna get a delay, but hopefully by the first week of August I will post all the pics on it and detail info also.but Joe when is the Exhaust coming out.
#36
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,446
Received 1,058 Likes
on
586 Posts
I was suppose to get it done this weekend, but since my wheels not gonna be here until the 27 th, so my brake install is gonna get a delay, but hopefully by the first week of August I will post all the pics on it and detail info also.but Joe when is the Exhaust coming out.
The Jig fabrication is in process.. We recently took on a few new accounts, so "our stuff" has sort of taken a longer bench time then I would have wanted..
I hope to have a lead time for the first run, nailed down this weekend.. But it might be September for completed production units..
~ Joe Z
#37
Lexus Test Driver
Thread Starter
Thanks for the update..!!!
The Jig fabrication is in process.. We recently took on a few new accounts, so "our stuff" has sort of taken a longer bench time then I would have wanted..
I hope to have a lead time for the first run, nailed down this weekend.. But it might be September for completed production units..
~ Joe Z
The Jig fabrication is in process.. We recently took on a few new accounts, so "our stuff" has sort of taken a longer bench time then I would have wanted..
I hope to have a lead time for the first run, nailed down this weekend.. But it might be September for completed production units..
~ Joe Z
Thread
Thread Starter
Forum
Replies
Last Post