3GS wheel thread
#1789
Lexus Test Driver
#1790
Driver School Candidate
Join Date: Feb 2016
Location: Maryland
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Hello guys,
First let me say hello I am new to this forum and owning a Lexus. I love the car so far and have been reading all the threads here. This wheel thread is awesome but I was unable to find the answer to my question. Can anyone tell me what the recommended wheel size and tire sizes are for a 2008 GS350 AWD? I would like to go to 20's possibly if I can. I do not want to deal with rubbing or bottoming out. As of right now I do not plan to lower the car. I also do not want to mess up the AWD. Any help/ideas would be greatly appreciated.
Thank you
Wes
First let me say hello I am new to this forum and owning a Lexus. I love the car so far and have been reading all the threads here. This wheel thread is awesome but I was unable to find the answer to my question. Can anyone tell me what the recommended wheel size and tire sizes are for a 2008 GS350 AWD? I would like to go to 20's possibly if I can. I do not want to deal with rubbing or bottoming out. As of right now I do not plan to lower the car. I also do not want to mess up the AWD. Any help/ideas would be greatly appreciated.
Thank you
Wes
-Shawn
#1793
Driver School Candidate
iTrader: (2)
Join Date: Mar 2013
Location: CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Weds Kranze Vishunu
Front: 19x8 +50 with 5mm spacer, 245/35/19 Hankook Ventus Evo 2
Rear: 19x9.5 +44, 275/30/19 Hankook Ventus Evo 2
Tein Comfort Sport Coilovers w/ 1.8" drop F/R
No fender mods and no rubbing
Front: 19x8 +50 with 5mm spacer, 245/35/19 Hankook Ventus Evo 2
Rear: 19x9.5 +44, 275/30/19 Hankook Ventus Evo 2
Tein Comfort Sport Coilovers w/ 1.8" drop F/R
No fender mods and no rubbing
#1794
Driver School Candidate
Join Date: Nov 2012
Location: Hawaii
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
question of the fitment gurus. i just picked up a set of work euroline dz in 19x9 +25 and 19x10 +20. Fronts are A disk, and rears are O-disk. Just went to test fit them, and the rears stick out just a tad bit, but I'm pretty sure when I drop the car more, and shave the rear fender, it should be good.
I'm more worried about the front, as the A-disk does not clear the caliper, and they are sticking out quite a bit as is, before a spacer. I haven't had a chance to grab spacers but I'm assuming a 10mm is in order, essentially putting the front offset at +15. Is this doable with just a roll? Thanks!
I'm more worried about the front, as the A-disk does not clear the caliper, and they are sticking out quite a bit as is, before a spacer. I haven't had a chance to grab spacers but I'm assuming a 10mm is in order, essentially putting the front offset at +15. Is this doable with just a roll? Thanks!
#1796
Driver School Candidate
19x9.5 +14 235/35<br/>19x11 +25 255/35<br/><br/>Front scrapes when hitting bumps and turning.. <br/><br/>I believe its rubbing the metal tab in the far top corner near the bumper. Anyone familiar with this and any tricks to get it to stop? <br/>
#1800
My new setup..
SSR MS3 in SBC finish / Polish Lip
19x9.5 +22 / 19x10.5 +18 with 235/255
ZERO rub what so ever.. I'm happy I found the ideal offsets for going low without rub lol
SSR MS3 in SBC finish / Polish Lip
19x9.5 +22 / 19x10.5 +18 with 235/255
ZERO rub what so ever.. I'm happy I found the ideal offsets for going low without rub lol