99 GS300 from Taiwan
#47
Lead Lap
Thread Starter
Something different.
Note: I'm not an approved vendor, therefore, I cannot discuss anything about this.
Just showing what I have been working on to modernize my GS.
Note: I'm not an approved vendor, therefore, I cannot discuss anything about this.
Just showing what I have been working on to modernize my GS.
#50
Pole Position
Lots of win in this thread!
#52
Lead Lap
Thread Starter
I've made some but lil progress on the hood. Been busy working on this.
https://www.youtube.com/watch?v=7uQR...ature=youtu.be
https://www.youtube.com/watch?v=7uQR...ature=youtu.be
Last edited by TW99GS300; 03-09-17 at 10:23 PM.
#53
Lead Lap
Thread Starter
few updates to the build, boost will be coming together soon.
Will start with the stock GE motor with 7 PSI and drop in a stroked 3.4 later.
Can't get any lower
Stock GE with headers
Dual 380C installed.
Haven't had time to finish this yet. RX350 inner LS460 outer. Both bixenon
Keyway for harmonic balance broke.
Old setup (cousins car) / new setup sitting next to each other.
Put some LED needles in.
Full Tom's lower brace. Cusco LSD installed.
Bunch of Lights here and there.
Swapped to Cermaic pads
"Mexico" Run
JDM Climate control with a twist
Will start with the stock GE motor with 7 PSI and drop in a stroked 3.4 later.
Can't get any lower
Stock GE with headers
Dual 380C installed.
Haven't had time to finish this yet. RX350 inner LS460 outer. Both bixenon
Keyway for harmonic balance broke.
Old setup (cousins car) / new setup sitting next to each other.
Put some LED needles in.
Full Tom's lower brace. Cusco LSD installed.
Bunch of Lights here and there.
Swapped to Cermaic pads
"Mexico" Run
JDM Climate control with a twist
Last edited by TW99GS300; 07-19-17 at 10:32 AM.
#54
Lead Lap
Thread Starter
Spotted by someone locally.
New shoes for " Mexico Run"
Mexico Run with the Benz Crew.
01+ Gauge bezel installed.
Keyway getting worse...
Nothing like a moving shot like these.
Temporary Trunk setup
Strut bar repowdered.
More Lights...
Ready for boost
New shoes for " Mexico Run"
Mexico Run with the Benz Crew.
01+ Gauge bezel installed.
Keyway getting worse...
Nothing like a moving shot like these.
Temporary Trunk setup
Strut bar repowdered.
More Lights...
Ready for boost
Last edited by TW99GS300; 07-19-17 at 10:37 AM.
The following users liked this post:
sakataj (07-13-17)
#56
Lead Lap
Thread Starter
I copied and pasted the images from my google photos. CL only pasted the link instead of the actual files.
Should be fixed now.
And here's another update.
Try to fit the BW S300SXE but ran into a few issues.
Gotta wait for more parts to come before I can get some boost.
Hopefully by August.
Should be fixed now.
And here's another update.
Try to fit the BW S300SXE but ran into a few issues.
Gotta wait for more parts to come before I can get some boost.
Hopefully by August.