99 GS300 from Taiwan
Hello fellow CL Members,
I just want to say the amount of information shared on this forum about the GS is amazing. Any problems I've ran into so far this forum has the answers to it. I am also an admin for a Taiwan FB group and have shared plenty of DIY information from here. Gotta thank the contributors over the years on this forum for sharing the knowledge. I've been a member on here for over a year but haven't done much to my GS until the last few months due to maintenance work that had to be done first. Sourcing parts isn't that cheap here as there is a premium with any OEM Lexus brand on it. I can say the good thing about being in Taiwan is that labor is cheaper and plenty of electrical parts for me to source from. Just want to share my 99 GS 300 build thus far with about 105,000 miles. Regular Maintenance: NGK Spark plug, OEM timing belt, Battery Break down repair: Accelerator Pedal Position Sensor, Throttle position sensor-VSC VSC off Limp mode Radiator-Leak Coolant Reservoir on fan shroud leak Lower Control Arm No. 2-Loud Clunk under floor board when parking and reversing. Lower Ball Joint-Too much play, oil leak Inner and outer pinion-Too much play Oil pan gasket-Leak Transmission pan gasket and filter-Leak and maintenance VVTI Solenoid-Leak Steering Rack Drive shaft center support bearing Engine & Transmission: Borg Warner S362-SXE 2JZ-GTE FFIM and modified non-vvti lower runner eBay manifold Tial MVS 38mm wastegate Tial BOV Sard radiator+Aristo Fan Sard 880cc injectors Custom fuel rail Sard 280 Fuel pump Greddy oil cooler and filter relocation kit. Trans cooler+Magnafilter Transmission line pressure switch adjusted HKS Fcon Vpro 3.24 HKS EVC 5 Suspension: OEM Lexus Motor Mount + Hardrace Transmission mount- motor thumps hard when gas is let off during high speeds. Hardrace Front Upper Control Arm- Too much play on passenger side Hardrace Rear Toe Control Arm-Bushing worn Hardrace Rear Traction Arm Hardrace Rear Upper Control Arm Hardrace Rear Lower Control Arm Carbing Front and Rear Strut tower brace Cusco 1.5 Way LSD Cusco Front and Rear Sway Bar (got a good deal and pass the Hardrace rear down to my cousin) Air Rex Air Suspension Bellow front and rear. 19" Varrstoen 120 19 x 8.5 +30 / 9.5 +33 with 20 mm front / 25 mm rear114.3 to 120 adapter spacers. 20x8.5 +36/ 9.5 +11 AME XS-20 17" unknown brand wheels TPMS with mini display Grex 6 Pot front + 355mm rotor / unknown brand 6 Pot rear + 345mm rotor. Ceramic pads Tom's full under brace kit. 30mm Shortened knuckles 10mm shortened ball joints 30mm RCAs Exterior: Q45 headlights (got lucky and swapped stock with another GS owner) 55W HID High and Low beams LED fog lights Puddle light with flashing module Rep 3 Piece wing Eagle Eyes Tail Light HIC rear visor JDM Chrome Window Trim Interior: Custom made EL Glow gauges with LED needles. CCFL Mood lighting on door trims Blue LED Climate, Console, lock and window switches. White LED Dome, Map, Rear door courtesy. Blue LED Lexus Logo Coasters for cup holder Lower door Lexus Logo projectors Voltmeter next to clock. Flossed VIP Car tray tables JP Tsuna, fusa, neckpads. Audio: JDM Pioneer Carrozzeria FH-9200 DVD head unit Diamond Audio TDX-10 Phoenix Gold Titanium 600.2 https://cimg7.ibsrv.net/gimg/www.clu...5abf4590bd.jpg https://cimg1.ibsrv.net/gimg/www.clu...1e711324b9.jpg https://cimg2.ibsrv.net/gimg/www.clu...582a81864c.jpg https://cimg0.ibsrv.net/gimg/www.clu...5830475014.jpg https://cimg4.ibsrv.net/gimg/www.clu...1a3ab910d8.jpg https://cimg5.ibsrv.net/gimg/www.clu...ea8be49c6a.jpg https://cimg7.ibsrv.net/gimg/www.clu...d120731cca.jpg https://cimg8.ibsrv.net/gimg/www.clu...dae61ac822.jpg https://cimg1.ibsrv.net/gimg/www.clu...9f804f822c.jpg https://cimg3.ibsrv.net/gimg/www.clu...0031a5ac50.jpg https://cimg9.ibsrv.net/gimg/www.clu...8731a7550c.jpg https://cimg2.ibsrv.net/gimg/www.clu...be9f709f7e.jpg https://cimg9.ibsrv.net/gimg/www.clu...60fe8811ed.jpg https://cimg6.ibsrv.net/gimg/www.clu...492e55a9bc.jpg https://cimg0.ibsrv.net/gimg/www.clu...2b97575f76.jpg |
Looks decent dude. I like the light under the wood trim on the doors, looks sick!
|
like the door panels give it the look of the new S class
|
Any info on the blue gauges/interior lights modification?
|
I'll be the first to say it, I like the girls.
Sweet car, the interior lighting is great. |
^^^ haha same here and the interior lighting is nice. info on the door trim lighting as well!!
|
Nice and clean!
|
How you make your cluster turn Blue Color? Pictures of how you did it please. Look very nice.
|
I'm glad you confirmed the route I was going to take with LED strips for gauge cluster. Thanks for info :thumbup:
|
Didn't know Hardrace make arms for the GS, used them before on my rsx-s very good brand.....
|
Wow, really love the CCFL door lights. Do you have a link to where you found yours, by chance?
The whole car looks great, man. Welcome! |
subscribed for full diy cluster led mod
|
Which city in Taiwan are you in? We go to Taichung about every year.
|
really nice mods, very unique, its my first time seeing the door trims like that.
|
Thank you all for the comments.
rogzballz I currently live in Taipei but has a home in Taichung. I also run a FB group here and have a meet on 8/22 for Lexus owners. The market is weird here, everyone is so secretive... vipXjunky and mveale, thanks for the comments and interests, unfortunately I do not have links to the items. Like I've said in my post, if you are interested I can get you six pieces for lengths under the wood grain and under the front door pockets. or whatever length you like with one inverter. Taiwan has some ridiculous items that are not well marketed. So I will do what I can to get it to the rest of the world. Will be starting a site separate from CL for Asia. Will keep y'all posted with new mod ideas and vendors when the time comes. Thanks for following and the positive comments. PS. Hopefully AirRex will be installed by the time the next meet comes around. |
All times are GMT -7. The time now is 11:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands