need fitment help
#1
Driver
Thread Starter
Join Date: Oct 2013
Location: nc
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
need fitment help
i need some insight on how to get my rear wheels to fit. they are 19x10.5 with a 265-40-19 tire. offset is et20. i have shaved the rears. i have read in numerous threads that you cant roll back fenders. what else can i do?i dont wanna raise car up anymore. there is already a 1/4 inch gap. settings on coilover set to hard. thanx guys
Last edited by perrychad1; 02-25-14 at 04:30 AM.
#7
Pole Position
iTrader: (1)
I hope he welded the 2 piece's together after the shave. If not I'd hate to see his rear fenders a year from now. Best way to do fenders if your going to go with a super aggressive fitment is to take it to a body shop and have it pulled/filled and re-sprayed. If not you'll be like 90% of the other Stanced cars with wrinkled busted *** fenders.
Trending Topics
#9
Driver
Thread Starter
Join Date: Oct 2013
Location: nc
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
The fender didn't split when I cut it. Still maybe 1/8 inch left. So if I do 245 on rear what size will I need on front. I got wheels and tires for free so not a big deal to change tires. Maybe I'll just sale the wheels and get the right offset. I'm so close but so far away
Last edited by perrychad1; 02-25-14 at 05:53 PM.
#10
Lexus Champion
iTrader: (17)
My rears have been shaved to within a couple mm's of flat for years without problems, as long as he didn't go literally completely flat he'll be ok. There's nothing left to roll if you've shaved like that.
Op, you're gonna need a 245/35 or 235/35 to fit without more extra work. Your wheels are 9 mm more aggressive than my 20's and a 245/35 is as wide as I can fit. I've got camber set as close to stock as possible and am a little lower than you so camber might be your friend, the tires have to go for sure though. Like yakuza said, they're too tall as well.
Op, you're gonna need a 245/35 or 235/35 to fit without more extra work. Your wheels are 9 mm more aggressive than my 20's and a 245/35 is as wide as I can fit. I've got camber set as close to stock as possible and am a little lower than you so camber might be your friend, the tires have to go for sure though. Like yakuza said, they're too tall as well.
#11
Lexus Champion
iTrader: (17)
The fender didn't split when I cut it. Still maybe 1/8 inch left. So if I do 245 on rear what size will I need on front. I got wheels and tires for free so not a big deal to change tires. Maybe I'll just sale the wheels and get the right offset. I'm so close but so far away
#12
Driver
Thread Starter
Join Date: Oct 2013
Location: nc
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
fronts are 19x9. they have 245-40-19 right now. offset is 20. same as rear. thanx again guys
also why would it matter if its a 30,35 or 40 series sidewall? i wanna tuck tire. trying to look like
sc4paulo at top of page.
also why would it matter if its a 30,35 or 40 series sidewall? i wanna tuck tire. trying to look like
sc4paulo at top of page.
Last edited by perrychad1; 02-26-14 at 04:56 AM.
#14
Driver
Thread Starter
Join Date: Oct 2013
Location: nc
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
too tall or too wide? any advice for front tire sizes? im gonna do the 235-35 on rear, should i do same size on front?
Last edited by perrychad1; 02-26-14 at 09:58 AM.
#15
Lexus Test Driver
iTrader: (2)
You can but it will look kind of goofy with the rim sunk in and the tires ballooning out,
9.5 + 20 in 215/35/19 10.5 235/35/19
Thread
Thread Starter
Forum
Replies
Last Post