Finally, its done.....
#35
Lexus Test Driver
iTrader: (21)
thanks man....it was worth the wait although it has some tweeking still to do, thanks....had i had to do it again i would have known i coulda pulled the OEM GPS and added a non nav one like chris did, i knew you could do it to the 1998-2000 but until i was in the middle of this i didnt know i could do it to the 2001+
Thanks!
#36
well the alternator and addressing the sub issue will be next then after they addressed i will start working on my suspension/rims than braking than power (may have to address more braking first though as the hawk pads,rotora rotors, and goodridge lines aren't doing as well now as she's a fat ***** and 2 times i have noticed she doesn't wanna stop as well)
thanks man, strippers DEF are never done....she just keeps taking my $
thank you
alot....i mean i added 11k of additional insurance to my car now for the parts/labor if i ever had to redo it....
well that one tat actually started out as just the angel and the devil...lets see 8th session was just finished (2 more sessions to go) the shop rate is $125 a hour (although i dont pay that much but i do tip $40 every session SINCE I DONT PAY THAT SHOP RATE) each session is like 3-4 hours so you do the math...its alot also. i have SEVERAL thousands of dollars in just that one piece but its a beautiful piece IMHO
yeah true true....alot by me too. but they did a great job to...thanks
haha i love stern.....he's sick just like me
no and i have even more pics of it i just didnt post them. it sounds amazing....even with the cone smell lol
Brian, sorry for the delay. Here you go: https://www.clublexus.com/forums/is-...lus-video.html
https://www.clublexus.com/forums/gs-...lus-video.html
thanks man.....yeah alot of my sweat/time/blood but it feels good to have done alot of this myself
thanks ty
ty
thank you
and dry....unlike our front ends (actually since all my dynamat, mine is dry)
ty man
i DID elaborate on this....
its towards the end of this
https://www.clublexus.com/forums/gs-...xx-owners.html
i dunno if he did a write up....PM ck6speed
Last edited by sakataj; 08-17-10 at 12:42 PM.
#38
Lexus Champion
iTrader: (1)
Join Date: May 2004
Location: Arizona
Posts: 2,673
Likes: 0
Received 0 Likes
on
0 Posts
Quality appears to be good, but I have to question the fabric choice, too. I also would ask when they are doing the redos that they line up the seams a bit better. This area in particular stood out to me:
All in all, it looks like a solid job, just the details that will take it to the next level. Ya done good, Brian!
Big Mack
All in all, it looks like a solid job, just the details that will take it to the next level. Ya done good, Brian!
Big Mack
#39
Lexus Test Driver
iTrader: (8)
Quality appears to be good, but I have to question the fabric choice, too. I also would ask when they are doing the redos that they line up the seams a bit better. This area in particular stood out to me:
All in all, it looks like a solid job, just the details that will take it to the next level. Ya done good, Brian!
Big Mack
All in all, it looks like a solid job, just the details that will take it to the next level. Ya done good, Brian!
Big Mack
#40
Lexus Test Driver
iTrader: (8)
Wait, I think I know what happened! Probably the same thing that happened to me when I made my amp rack.... Dropped the panel and broke it! redoing panels suck. The panel is one piece in this photo, woofer trim looks like it broke Hell, i did the same thing on my last set up.
Last edited by Mr Jokster; 07-02-10 at 01:08 AM.
#45
thanks
i dunno bout the fabric, im really not sure bout it. the reason the seam is off in that pic is cause the bottom piece was unbolted and had slid aside in that pic
i dunno.....
i never even noticed this was one piece at first, i will have to ask them bout this....im thinking bout getting the amp racks done with plexiglass covering them
thanks chris they do look great
thanks man, i have been.....took several years of gathering parts and misc stuff to get this done
thanks man, looking to do some major work still even after all i have done
its not really in the stock location, as a matter of fact, there isnt any area of the OEM sub location left. they cut it all out
Quality appears to be good, but I have to question the fabric choice, too. I also would ask when they are doing the redos that they line up the seams a bit better. This area in particular stood out to me:
All in all, it looks like a solid job, just the details that will take it to the next level. Ya done good, Brian!
Big Mack
All in all, it looks like a solid job, just the details that will take it to the next level. Ya done good, Brian!
Big Mack
Wait, I think I know what happened! Probably the same thing that happened to me when I made my amp rack.... Dropped the panel and broke it! redoing panels suck. The panel is one piece in this photo, woofer trim looks like it broke Hell, i did the same thing on my last set up.
thanks chris they do look great
thanks man, looking to do some major work still even after all i have done
its not really in the stock location, as a matter of fact, there isnt any area of the OEM sub location left. they cut it all out