jonathanmx

hey guys I got a aristo swapped gs my rear turbo went out I installed new jdm turbos on it welded flapper open took the plate out the fresh air for the second turbo deleted the vsv solenoid the car feels a lot better I checked my boost and im only running 7psi at the manifold I have a ball and spring type boost controller where would I install it to control both turbos . sorry if this is a dumb post this is my first 2jz I've been searching but kinda feel like im not getting the right answer . any help would be appreciated.

jonathanmx

can anyone please help ?

kene

iTrader: (2)

I wish I could help, but don't be discouraged. The 1st gen GS300 forum moves slower than other newer model forum sections. Since its a 2jz maybe ask in the 2nd gen gs300 forums as well.

jonathanmx

ok thank you for your help

houndawgbp

Sometimes it could be your waste gate. I had a similar set up on my 90 supra turbo but obviously it was the 7M single turbo but it was a faulty waste gate.