19x10 all around? Looking at 15-20mm offset
#1
Rookie
Thread Starter
iTrader: (3)
Join Date: Mar 2010
Location: CA
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
19x10 all around? Looking at 15-20mm offset
Just wondering if anyone is running a 19x10 wheel both front & back?
Wheels im looking are are either 15 or 20mm offset. Havent confirmed yet.
Would appreciate pics. And to know if you required any rolling, shaving, etc. . . .
Thanks
~Chris
Wheels im looking are are either 15 or 20mm offset. Havent confirmed yet.
Would appreciate pics. And to know if you required any rolling, shaving, etc. . . .
Thanks
~Chris
#6
Driver School Candidate
Trending Topics
#13
Driver School Candidate
Join Date: Sep 2011
Location: Ontario
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I got some 20x11 15mm coming my way. I'll take a pic of it on the car when I get it. My rim should stick out just a little bit more than a 10" wide 15mm so it should give you a good idea.
#14
Rookie
Thread Starter
iTrader: (3)
Join Date: Mar 2010
Location: CA
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Finally picked up my set of wheels.
19x10 Vossen VSS084 all around. Moderately stretched 235/35 tires.
They were only available in a +38 offset.
Fronts: inside wheels clears the spindle arm by about 2mm. DOESNT rub, but its damn close! Outside of the wheels site pretty flush with the fender, but no rubbing issues.
Rears: plenty of clearance inside and outside.
Im dropped on D2 coilovers, estimating a 5-6" drop
As it sits right now, i have absolutely ZERO rubbing issues. Nothing at full lock, and nothing when entering/exiting driveways, etc . . . This is a great setup for those who are looking for aggressive fitment but who dont want to deal with the "Hellaflush" rubbing issues.
I do plan to have my fenders rolled, and then to add some spacers to have the wheels sit completely flush.
Ill get more pics posted as soon as i get it done.
19x10 Vossen VSS084 all around. Moderately stretched 235/35 tires.
They were only available in a +38 offset.
Fronts: inside wheels clears the spindle arm by about 2mm. DOESNT rub, but its damn close! Outside of the wheels site pretty flush with the fender, but no rubbing issues.
Rears: plenty of clearance inside and outside.
Im dropped on D2 coilovers, estimating a 5-6" drop
As it sits right now, i have absolutely ZERO rubbing issues. Nothing at full lock, and nothing when entering/exiting driveways, etc . . . This is a great setup for those who are looking for aggressive fitment but who dont want to deal with the "Hellaflush" rubbing issues.
I do plan to have my fenders rolled, and then to add some spacers to have the wheels sit completely flush.
Ill get more pics posted as soon as i get it done.
Thread
Thread Starter
Forum
Replies
Last Post