Pillar pod fab w/pix
#1
Lexus Champion
Thread Starter
Pillar pod fab w/pix
I should have take more pix but this will give you an idea what im up to. I got a few gauges. I only want the boost gauge out to the nekid eye. The others are going to be squireled away in the glove box.
The boost gauge I got is 60mm
I used a piece of PVC pipe with an ID to meed the OD of the gauge.
Then a drain grate that had a lip on it that would allow me to recess the gauge flush.
Next I stripped the pillar trim of its cloth covering. I cut mine in two pieces so I wouldnt have to take the seat belt on and off ever time I remove the pod.
Then I used superglue and accelerator with cardboard and plastic to set where I wanted the gauge.
I skipped a whole proceedure but I did have my cell camera so heres the raw fiberglassed grill cloth with rib cage before the duraglass went on.
The boost gauge I got is 60mm
I used a piece of PVC pipe with an ID to meed the OD of the gauge.
Then a drain grate that had a lip on it that would allow me to recess the gauge flush.
Next I stripped the pillar trim of its cloth covering. I cut mine in two pieces so I wouldnt have to take the seat belt on and off ever time I remove the pod.
Then I used superglue and accelerator with cardboard and plastic to set where I wanted the gauge.
I skipped a whole proceedure but I did have my cell camera so heres the raw fiberglassed grill cloth with rib cage before the duraglass went on.
#4
Lexus Champion
Thread Starter
Im going to end up covering it in cloth, once I figure out what color and type. Im thinking about microfiber. Dont know what color yet though. Im not feelin the tan anymore. I think the wifes GS430 with black interior has jaded me
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
waijai
General Classifieds
1
08-10-15 10:16 AM