wheel help please
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2015
Location: mo.
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
wheel help please
My stock wheels on my es 330 are flaking and have some curb rash. I found a set of toyota highlander wheels 17 inch in great shape. will the centerbore be the same diameter? I know the highlander wheel has a centerbore of 60.1 mm. I dont know the centerbore of the es wheels. thanks
Jim
Jim
#2
Lexus Champion
The Lexus and Toyota center-bores are the same at 60.1mm. Double check the offset on the Highlander rims to see if they'll clear your struts or stick proud of the fender.
#4
Driver School Candidate
Thread Starter
Join Date: Mar 2015
Location: mo.
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Wheels
Thanks. The highlander wheels are from a 2011. I checked the bolt pattern I should be good. I found a offset calculator and it looks like the wheel will stick out 8.5 mm more towards the fender lip and 4.5 mm more towards the strut. That is not much so I am hoping I will have clearance.
Jim
Jim
#5
Driver School Candidate
Thread Starter
Join Date: Mar 2015
Location: mo.
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Wheel offset
The stock wheels are supposed to be 7x17j et 37
#7
Driver School Candidate
Thread Starter
Join Date: Mar 2015
Location: mo.
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Driver School Candidate
Thread Starter
Join Date: Mar 2015
Location: mo.
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Well I pulled my spare out and it turns out it has a 50mm offset. Bummer I now think the highlander wheels would move my tires out about .820" Now I am not so sure I would have clearance. Anyone need some really nice toyota Highlander wheels ? :-)
#10
Lexus Champion
The stock Lexus ES330/350 wheels are 17x7" with a 50mm offset.
The Highlander wheel at a 35mm offset would mean your wheel would stick 15mm outward (away from the strut, toward the fender).
You can take some measurements to see if it will fit your fender, otherwise you could roll your fenders to clear the tires. My gut feeling is it shouldn't be an issue.
The Highlander wheel at a 35mm offset would mean your wheel would stick 15mm outward (away from the strut, toward the fender).
You can take some measurements to see if it will fit your fender, otherwise you could roll your fenders to clear the tires. My gut feeling is it shouldn't be an issue.
#11
Driver School Candidate
Thread Starter
Join Date: Mar 2015
Location: mo.
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
The stock Lexus ES330/350 wheels are 17x7" with a 50mm offset.
The Highlander wheel at a 35mm offset would mean your wheel would stick 15mm outward (away from the strut, toward the fender).
You can take some measurements to see if it will fit your fender, otherwise you could roll your fenders to clear the tires. My gut feeling is it shouldn't be an issue.
The Highlander wheel at a 35mm offset would mean your wheel would stick 15mm outward (away from the strut, toward the fender).
You can take some measurements to see if it will fit your fender, otherwise you could roll your fenders to clear the tires. My gut feeling is it shouldn't be an issue.
I will have to put a tire on one of the wheels and put it on the front and try it to see if it rubs. It is gonna be close.
Jim
Thread
Thread Starter
Forum
Replies
Last Post
The_Hitman
Wheels, Tires & Brakes Forum
7
02-03-05 01:07 AM