Missing vacuum line?
#3
Driver School Candidate
Join Date: Dec 2013
Location: MN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
What year is it? How is it running? Is it setting any codes?
Looks like there is an open vacuum port next to the blue electrical connector in your photo. Your comparative photo is from a different angle, so it is hard to compare the two but it does look like there is a hose missing. If that's true, there should be a second port without a hose somewhere else under the hood.
There should be a vacuum diagram sticker under the hood or you could try searching the Club Lexus or the web for a diagram.
George
Looks like there is an open vacuum port next to the blue electrical connector in your photo. Your comparative photo is from a different angle, so it is hard to compare the two but it does look like there is a hose missing. If that's true, there should be a second port without a hose somewhere else under the hood.
There should be a vacuum diagram sticker under the hood or you could try searching the Club Lexus or the web for a diagram.
George
#4
Driver School Candidate
Thread Starter
Join Date: Feb 2015
Location: Maine
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
It is a 2003. IT runs fine and is not throwing a code yet. I don't think the comparative picture is helpful. There is definetly an open port there, but I can't seem to find a corresponding hose or open outlet. Was hoping someone had the same car and look and tell me. Thanks for the quick reply.
Last edited by JTLexFan; 02-28-15 at 02:27 PM. Reason: Spelling
#5
Driver School Candidate
Join Date: Dec 2013
Location: MN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
It is a 2003. IT runs fine and is not throwing a code yet. I don't think the comparative picture is helpful. There is definetly an open port there, but I can't seem to find a corresponding hose or open outlet. Was hoping someone had the same car and look and tell me. Thanks for the quick reply.
Take care,
George
#6
Driver School Candidate
Thread Starter
Join Date: Feb 2015
Location: Maine
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Found the missing port. It was broken off. Had to pull that bracket off to see it. Not sure what to do from here. Need to identify the broken part.
Thread
Thread Starter
Forum
Replies
Last Post
hendrix101
GS - 1st Gen (1993-1997)
1
11-09-16 04:41 PM