Offsets
#1
Pole Position
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: MD Smitty runs da City
Posts: 3,002
Likes: 0
Received 5 Likes
on
5 Posts
Offsets
I was wondering what the offsets would work for a 2000-2001 ES? I want to go with a more aggressive wheel for my next rims so I'm doing my reasearch.
#3
Lexus Test Driver
iTrader: (6)
same here, as far as i know, with coilovers a 9" width rim would need about a positive 15 et, but then i am unsure about the frontspacing, i believe it will stick out too much.
im actually about to order up a set of sc430 wheels, and go from there.
then, i can get an exact measurement with the widest wheels, and lowest offset. but am unsure if sc430 wheels will even clear coilovers. because from what i remember reading, 3mm spacers are required for the rear, but i believe that is on a strut suspension. so for coilovers? im thinking it might be too big.
o well, lets see.
im actually about to order up a set of sc430 wheels, and go from there.
then, i can get an exact measurement with the widest wheels, and lowest offset. but am unsure if sc430 wheels will even clear coilovers. because from what i remember reading, 3mm spacers are required for the rear, but i believe that is on a strut suspension. so for coilovers? im thinking it might be too big.
o well, lets see.
#6
Pole Position
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: MD Smitty runs da City
Posts: 3,002
Likes: 0
Received 5 Likes
on
5 Posts
I defintely want the shaved fenders but I'm sure about the stretched tires. A little negative camber might be nice more of a VIP look I think. I want some Work wheels. Either the
Euroline DH
or the Euroline DZ
I think they'll look pretty good on my ES
Euroline DH
or the Euroline DZ
I think they'll look pretty good on my ES
#7
Moderator
iTrader: (21)
I defintely want the shaved fenders but I'm sure about the stretched tires. A little negative camber might be nice more of a VIP look I think. I want some Work wheels. Either the
Euroline DH
[IG]https://www.d2autosport.com/D2_2006/06_Wheels/wheels/works/WORK%20EUROLINE%20DH.jpg[/IMG]
or the Euroline DZ
[IG]https://www.d2autosport.com/D2_2006/06_Wheels/wheels/works/WORK%20EUROLINE%20DZ.JPG[/IMG]
I think they'll look pretty good on my ES
[IG]http://i28.photobucket.com/albums/c208/sdsmi10/Misc/IMG_0393.jpg[/IMG]
Euroline DH
[IG]https://www.d2autosport.com/D2_2006/06_Wheels/wheels/works/WORK%20EUROLINE%20DH.jpg[/IMG]
or the Euroline DZ
[IG]https://www.d2autosport.com/D2_2006/06_Wheels/wheels/works/WORK%20EUROLINE%20DZ.JPG[/IMG]
I think they'll look pretty good on my ES
[IG]http://i28.photobucket.com/albums/c208/sdsmi10/Misc/IMG_0393.jpg[/IMG]
Trending Topics
#8
Lexus Test Driver
iTrader: (6)
lol, funny lights man, jk. my brother and i just installed a set on both of our es'.
work wheels are nice, very. but pictures are quite deceiving. work wheels have a lip thats a rolled edge. how do i know, because i spent 3k on my vs-xx's and saw them for myself. personally i wanted the dh's and dv's as well, but with that kind of edge i think would look very funny on our cars. but you have your own opinion and its respected, but be warned.
and negative camber is a must. im running maxxed out negative camber right now as well.
goodluck.
Charley
work wheels are nice, very. but pictures are quite deceiving. work wheels have a lip thats a rolled edge. how do i know, because i spent 3k on my vs-xx's and saw them for myself. personally i wanted the dh's and dv's as well, but with that kind of edge i think would look very funny on our cars. but you have your own opinion and its respected, but be warned.
and negative camber is a must. im running maxxed out negative camber right now as well.
goodluck.
Charley
#9
Pole Position
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: MD Smitty runs da City
Posts: 3,002
Likes: 0
Received 5 Likes
on
5 Posts
lol, funny lights man, jk. my brother and i just installed a set on both of our es'.
work wheels are nice, very. but pictures are quite deceiving. work wheels have a lip thats a rolled edge. how do i know, because i spent 3k on my vs-xx's and saw them for myself. personally i wanted the dh's and dv's as well, but with that kind of edge i think would look very funny on our cars. but you have your own opinion and its respected, but be warned.
and negative camber is a must. im running maxxed out negative camber right now as well.
goodluck.
Charley
work wheels are nice, very. but pictures are quite deceiving. work wheels have a lip thats a rolled edge. how do i know, because i spent 3k on my vs-xx's and saw them for myself. personally i wanted the dh's and dv's as well, but with that kind of edge i think would look very funny on our cars. but you have your own opinion and its respected, but be warned.
and negative camber is a must. im running maxxed out negative camber right now as well.
goodluck.
Charley
#10
Lexus Test Driver
iTrader: (6)
well, im on ksport coilovers. it is very very nice, as usual. but there is some problem with my front swaybar endlinks that keep breaking or getting wrapped around the coilover.
negative camber is not a bad thing, as long as toe is at 0. i say that the fronts can probably go to about -3 degrees and about -1.5 the most.
i like it.
Charley
negative camber is not a bad thing, as long as toe is at 0. i say that the fronts can probably go to about -3 degrees and about -1.5 the most.
i like it.
Charley
Thread
Thread Starter
Forum
Replies
Last Post
99SC42
Suspension and Brakes
16
07-10-12 12:33 PM