Max Torque for combined system output ?
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2011
Location: Switzerland
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Max Torque for combined system output ?
I'm trying to find out the maximun level of torque the can be provided by the Combined System of Engine + Electric Motor
Here below the technical data that I've found on the technical specification datasheet:
Engine Gasoline
Maximum power (kW/rpm) 73/5200
Maximum torque (Nm/rpm) 142/4000
Electric Motor
Maximum output (kW) 60
Maximum torque (Nm) 207
Combined System Output
Power (kW) 100
Torque (Nm) ??
Somebody could help me on this?
Thank you very much!
Here below the technical data that I've found on the technical specification datasheet:
Engine Gasoline
Maximum power (kW/rpm) 73/5200
Maximum torque (Nm/rpm) 142/4000
Electric Motor
Maximum output (kW) 60
Maximum torque (Nm) 207
Combined System Output
Power (kW) 100
Torque (Nm) ??
Somebody could help me on this?
Thank you very much!
#3
Driver School Candidate
Thread Starter
Join Date: Jul 2011
Location: Switzerland
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
#6
ThomasGS4,
I was only out in the CT today to fill it up! Was driving around mainly in the S2000 with the top down and the A/C full blast + RECIRC (higher fan speed)
I live in the Houston, TX area and travel frequently on I-45 to Huntsville, TX ( where my cabin is).
Since you live in DFW , it wasn't me normally don't get that far North
MidCow3
P.S. - I have been looking but haven't seen another CT yet.
I was only out in the CT today to fill it up! Was driving around mainly in the S2000 with the top down and the A/C full blast + RECIRC (higher fan speed)
I live in the Houston, TX area and travel frequently on I-45 to Huntsville, TX ( where my cabin is).
Since you live in DFW , it wasn't me normally don't get that far North
MidCow3
P.S. - I have been looking but haven't seen another CT yet.
Trending Topics
#8
Driver School Candidate
Thread Starter
Join Date: Jul 2011
Location: Switzerland
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Somebody can help me on this request?
The Dynamometer graph of Gen III Prius shows only the Power (hp) / Speed (mph) performance, nothing related to the the maximum torque value..
Thanks
The Dynamometer graph of Gen III Prius shows only the Power (hp) / Speed (mph) performance, nothing related to the the maximum torque value..
Thanks
#9
Sorry I missed your request
Here is where I got it from
http://priuschat.com/forums/gen-iii-...rius-dyno.html
There are a lot of discussion on Prius chat froums about the hybrid synergy system which is hard to compare to ratings on standard internal combustion engines becuase the MG2 torque can be added instantly at almost any speed.
http://priuschat.com/forums/gen-iii-...rius-dyno.html
There are a lot of discussion on Prius chat froums about the hybrid synergy system which is hard to compare to ratings on standard internal combustion engines becuase the MG2 torque can be added instantly at almost any speed.
#11
Thread
Thread Starter
Forum
Replies
Last Post