*** JDM Blackwood kit ** any interest? **
#62
Original CL Sponsor since 1999
Thread Starter
I have another place in New York that does OE wood for the auto manufacturers and can contact them, in fact I'll just take the JDM piece with me to SEMA, more than one there so hang in with me guys....................let''s start a count of interested members so I have something solid to tell them.
#68
Northern California Regional Officer
iTrader: (5)
Chaskim and I are working on a couple of vendors to convert our center consoles to blackwood. I have a blackwood piece already sent out to one vendor who is trying match it. We've also got a second one in the same process as well.
Between the two, we hope to get a perfect match to the blackwood door pieces.
I think this is our best bet guys.
Between the two, we hope to get a perfect match to the blackwood door pieces.
I think this is our best bet guys.
#69
Original CL Sponsor since 1999
Thread Starter
Back from the SEMA show................on the blackwood, I gave two well known vendors some samples to match for the center console and ashtray.
Here's the other part, I wont be able to make a molded piece unless I order a minimum quantity 200, tooling,molds, that's not going to happen ..so, that leaves me with a thin applique type like the Wood kits
I'll see what they turn out like, since these companies already make OE kits it should be a qualtiy match
Here's the other part, I wont be able to make a molded piece unless I order a minimum quantity 200, tooling,molds, that's not going to happen ..so, that leaves me with a thin applique type like the Wood kits
I'll see what they turn out like, since these companies already make OE kits it should be a qualtiy match
#70
Northern California Regional Officer
iTrader: (5)
Good to hear Steve.
Like I said, we have two sources working off of door trim samples as well. From these four sources we should be able to come up with one or more good matches. Then it's just up to pricing and quantity.
I'll let everyone know when I get a sample from either of my sources.
Like I said, we have two sources working off of door trim samples as well. From these four sources we should be able to come up with one or more good matches. Then it's just up to pricing and quantity.
I'll let everyone know when I get a sample from either of my sources.
Thread
Thread Starter
Forum
Replies
Last Post
Lexobenz
2Gen GS430 / 400/ 300 Classifieds (98-05)
19
12-29-03 04:35 PM