***Don Nguyen | WannabeRacer.com | Vehicle Wrap - Tint - Plastidip - Custom Decals***
#1
Former Sponsor
Thread Starter
***Don Nguyen | WannabeRacer.com | Vehicle Wrap - Tint - Plastidip - Custom Decals***
The information of my available services in my old vendor/sponsor threads are a bit outdated. This new thread includes revised up to date information on what I currently offer. Link to old thread: https://www.clublexus.com/forums/clu...m-install.html
WannabeRacer.com
Facebook Page - Gallery
E-mail: Don@WannabeRacer.com
Vinyl Materials / DIY:
Installation Services:
3M Carbon fiber Vinyl Roof Wraps:
Blacked Out Window Trim:
Tinted Head and Tail Lights:
Interior Vinyl Wrapping:
Misc Vinyl Wrap Requests:
Plasti Dip:
WannabeRacer.com
Let me know if you guys have any questions or if you are interested in getting some work done.
thanks.
-Don
Don@WannabeRacer.com
WannabeRacer.com
Facebook Page - Gallery
E-mail: Don@WannabeRacer.com
Vinyl Materials / DIY:
- Pre cut vinyl (IE: Pre cut roof, window trim pieces, tail lights, etc)
If you are interested in me developing pre cut pieces for your car to make your DIY installations easier, I would need a minimum group of 5-10 people interested in the same pre cut materials. Contact me at Don@WannabeRacer.com for more information.
- Custom cut stickers / decals
- Vinyl sheets and rolls
- DIY materials and instructions
- Group buys
If you are interested in me developing pre cut pieces for your car to make your DIY installations easier, I would need a minimum group of 5-10 people interested in the same pre cut materials. Contact me at Don@WannabeRacer.com for more information.
- Custom cut stickers / decals
- Vinyl sheets and rolls
- DIY materials and instructions
- Group buys
Installation Services:
- Gloss and matte black roof vinyl (other finishes/colors are available upon request)
- Carbon fiber vinyl wraps
- Black out chrome/brushed aluminum window trim vinyl
- Interior and exterior trim
- Head / tail light tinting
- Full car wraps
- Graphic / vinyl installations
Gloss and Matte Black Roofs:- Carbon fiber vinyl wraps
- Black out chrome/brushed aluminum window trim vinyl
- Interior and exterior trim
- Head / tail light tinting
- Full car wraps
- Graphic / vinyl installations
3M Carbon fiber Vinyl Roof Wraps:
Blacked Out Window Trim:
Tinted Head and Tail Lights:
Interior Vinyl Wrapping:
Misc Vinyl Wrap Requests:
Plasti Dip:
WannabeRacer.com
Let me know if you guys have any questions or if you are interested in getting some work done.
thanks.
-Don
Don@WannabeRacer.com
#3
Former Sponsor
Thread Starter
If I can get around 10 other RC guys who would be interested in a pre cut sheet for the roof, I can put the time into making a pre cut roof sheet for you guys.
Let me know if you can get that many people interested and I'll make it happen.
Thanks.
-Don
Let me know if you can get that many people interested and I'll make it happen.
Thanks.
-Don
#7
Former Sponsor
Thread Starter
- Plasti dip rear badges
This is not a Lexus, but I had several people ask me for some more detailed or close up pictures of my plasti dip work and I happen to already have these resized and ready to go. The owner of this white Audi A6 sedan came by my shop in Anaheim Hills / Orange County to have the plasti dip work done, along with getting his roof wrapped and chrome window trim blacked out. Since he was blacking out everything else, blacking out the chrome badges made everything flow together fairly well.
-Don Nguyen
Don@WannabeRacer.com
This is not a Lexus, but I had several people ask me for some more detailed or close up pictures of my plasti dip work and I happen to already have these resized and ready to go. The owner of this white Audi A6 sedan came by my shop in Anaheim Hills / Orange County to have the plasti dip work done, along with getting his roof wrapped and chrome window trim blacked out. Since he was blacking out everything else, blacking out the chrome badges made everything flow together fairly well.
-Don Nguyen
Don@WannabeRacer.com
Trending Topics
#9
Former Sponsor
Thread Starter
Overview:
- Gloss black front grill
- Gloss black window trim
- Gloss rear trunk handle piece
The owner of this grey Lexus GS350 F Sport sedan had me black out the remaining chrome pieces that were on his car. We went with the gloss black finish for everything, to give it a factory finish and look. The owner of the car drove out to me in Anaheim Hills / Orange County to have the vehicle vinyl wrap work done. The gloss black on the chrome pieces really gives the car a sportier look, but without making the car look too overly modified or look as if the pieces were aftermarket. Blacking out the chrome is a good look for those who want something subtle that’ll set their cars off from a regular GS.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
- Gloss black front grill
- Gloss black window trim
- Gloss rear trunk handle piece
The owner of this grey Lexus GS350 F Sport sedan had me black out the remaining chrome pieces that were on his car. We went with the gloss black finish for everything, to give it a factory finish and look. The owner of the car drove out to me in Anaheim Hills / Orange County to have the vehicle vinyl wrap work done. The gloss black on the chrome pieces really gives the car a sportier look, but without making the car look too overly modified or look as if the pieces were aftermarket. Blacking out the chrome is a good look for those who want something subtle that’ll set their cars off from a regular GS.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
#10
Former Sponsor
Thread Starter
Overview:
- Tinted / Smoked vinyl wrapped head lights
- Plasti dip matte black front grill
- 3M 1080 gloss carbon fiber lower center bumper lip
For this black Audi S5 coupe, I lightly smoked / tinted the head lights, wrapped the lower center bumper lip in the 3M 1080 gloss carbon fiber, and I plasti dipped the entire grill in a matte black finish. We did keep the chrome rings on the front and also the S5 badge in the grill their original finish/colors. The owner of this car came out to me in Anaheim Hils / Orange County from San Diego to get the vinyl and plasti dip work done. People are sometimes worried that the tint on head lights will reduce light out put, but the shade is fairly light, so that the light output is essentially unaffected. The additional benefit of wrapping the head lights is the protection they provide from rock chips and also helps prevent it from fading/oxidizing.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
- Tinted / Smoked vinyl wrapped head lights
- Plasti dip matte black front grill
- 3M 1080 gloss carbon fiber lower center bumper lip
For this black Audi S5 coupe, I lightly smoked / tinted the head lights, wrapped the lower center bumper lip in the 3M 1080 gloss carbon fiber, and I plasti dipped the entire grill in a matte black finish. We did keep the chrome rings on the front and also the S5 badge in the grill their original finish/colors. The owner of this car came out to me in Anaheim Hils / Orange County from San Diego to get the vinyl and plasti dip work done. People are sometimes worried that the tint on head lights will reduce light out put, but the shade is fairly light, so that the light output is essentially unaffected. The additional benefit of wrapping the head lights is the protection they provide from rock chips and also helps prevent it from fading/oxidizing.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
Last edited by Don Nguyen; 05-21-16 at 08:59 AM.
#11
Former Sponsor
Thread Starter
Overview:
- Gloss black front grill
- Gloss black window trim and rear trunk bar
- Tinted / smoked rear tail lights
For this black Mercedes Benz C63 AMG coupe, I blacked out the chrome trim pieces around the window, front grill, and rear trunk bar in my gloss black vinyl material, to give it a factory finish/look, similar to the black optics package that is available for these cars now. I also lightly tinted / smoked his rear tail lights as well. The chrome pieces were not all completely blacked out, which still gave the car some contrast. The work done gives the car a nice subtle change without making anything look after market. Most people would think that the car came this way from the factory. The owner of the car drove out to me in Anaheim Hills / Orange County from Pasadena to get the vinyl work done.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
- Gloss black front grill
- Gloss black window trim and rear trunk bar
- Tinted / smoked rear tail lights
For this black Mercedes Benz C63 AMG coupe, I blacked out the chrome trim pieces around the window, front grill, and rear trunk bar in my gloss black vinyl material, to give it a factory finish/look, similar to the black optics package that is available for these cars now. I also lightly tinted / smoked his rear tail lights as well. The chrome pieces were not all completely blacked out, which still gave the car some contrast. The work done gives the car a nice subtle change without making anything look after market. Most people would think that the car came this way from the factory. The owner of the car drove out to me in Anaheim Hills / Orange County from Pasadena to get the vinyl work done.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
#13
Former Sponsor
Thread Starter
I am not aware of what the sticky dash issue is on the IS300s.
Overview:
- Gloss black vinyl roof wrap
- Tinted / smoked tail lights
For this Audi A4 B7 Sedan, we wrapped the roof of his car in my gloss black vinyl material and also lightly tinted / smoked the tail lights on the car. The tail lights were actually fairly dull and almost a matte finish before wrapping them, which can be seen in one of the close up pictures of the rear tail light. However, I was able to bring life back into them again and make them possibly even glossier / shinier than they were brand new from the factory. So even for those who are not looking to necessarily change the look of their car up, I am also able to vinyl wrap certain pieces/parts on the car to help restore certain faded/oxidized finishes. The owner of this car was from Fullerton brought his car to me in Anaheim Hills / Orange County to have the vinyl work done.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
Overview:
- Gloss black vinyl roof wrap
- Tinted / smoked tail lights
For this Audi A4 B7 Sedan, we wrapped the roof of his car in my gloss black vinyl material and also lightly tinted / smoked the tail lights on the car. The tail lights were actually fairly dull and almost a matte finish before wrapping them, which can be seen in one of the close up pictures of the rear tail light. However, I was able to bring life back into them again and make them possibly even glossier / shinier than they were brand new from the factory. So even for those who are not looking to necessarily change the look of their car up, I am also able to vinyl wrap certain pieces/parts on the car to help restore certain faded/oxidized finishes. The owner of this car was from Fullerton brought his car to me in Anaheim Hills / Orange County to have the vinyl work done.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
#14
Former Sponsor
Thread Starter
Overview:
- Plasti dip front and rear badges
- Gloss back front and rear reflectors
This white 2016 Bentley Continental GT3R came in to have me black out the chrome badges / emblems on the trunk and hood of the car. I also ended up blacking out the red and amber reflectors on the front and back bumpers of the car. Sometimes small subtle changes such as the work I did for this Bentley is all a car needs. The owner of this car was from Los Angeles and came out to me in Anaheim Hills / Orange County to have the vinyl car wrap work done.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
- Plasti dip front and rear badges
- Gloss back front and rear reflectors
This white 2016 Bentley Continental GT3R came in to have me black out the chrome badges / emblems on the trunk and hood of the car. I also ended up blacking out the red and amber reflectors on the front and back bumpers of the car. Sometimes small subtle changes such as the work I did for this Bentley is all a car needs. The owner of this car was from Los Angeles and came out to me in Anaheim Hills / Orange County to have the vinyl car wrap work done.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
#15
Former Sponsor
Thread Starter
Overview:
- Gloss black window trim vinyl wrap
- Gloss black front grill wrap
Most people usually say that most vinyl wraps usually look the best on white or lighter colored car, but that is not the case, especially when it involves wrapping or covering up the chrome trim pieces on a car. If anything, the chrome accents on the car probably stand out even more so on a darker colored car than a lighter one. For this Lexus IS350 F Sport sedan, the owner had me vinyl wrap both the chrome window trim and front grill in my gloss black vinyl material. The owner of the car was from Riverside and came out to me in Anaheim Hills / Orange County to have the work done. As you can see in the side by side before and after picture that I have back to back, the change is subtle, but still improves the overall look of the car quite dramatically.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com
- Gloss black window trim vinyl wrap
- Gloss black front grill wrap
Most people usually say that most vinyl wraps usually look the best on white or lighter colored car, but that is not the case, especially when it involves wrapping or covering up the chrome trim pieces on a car. If anything, the chrome accents on the car probably stand out even more so on a darker colored car than a lighter one. For this Lexus IS350 F Sport sedan, the owner had me vinyl wrap both the chrome window trim and front grill in my gloss black vinyl material. The owner of the car was from Riverside and came out to me in Anaheim Hills / Orange County to have the work done. As you can see in the side by side before and after picture that I have back to back, the change is subtle, but still improves the overall look of the car quite dramatically.
Before:
After:
-Don Nguyen
Don@WannabeRacer.com