Adjustable Rear Rca For Gs
#1
Club Lexus Vendor
Thread Starter
Adjustable Rear Rca For Gs
Good news GS owners! Finally we have the rear RCA done & ready to ship, limited supply on hand, pm us or call Sandy to reserve for your car. Thank you!
Check out the pictures at our web site.
Check out the pictures at our web site.
__________________
Exact Motorsports
907 Hanson Court
Milpitas, CA 95035
(408) 416 - 0061
(408) 263 - 8100
www.exactmotorsports.com
Exact Motorsports
907 Hanson Court
Milpitas, CA 95035
(408) 416 - 0061
(408) 263 - 8100
www.exactmotorsports.com
Last edited by EXACT; 08-15-08 at 05:02 PM.
#4
What's the price for front and rears? Also, when you say "limited supply", does that mean you will not be making any more after these are sold out? Thanks
#5
Club Lexus Vendor
Thread Starter
The price for front $179.99 a pair, rear $299.99 a pair for the first 10 orders. We will order more depend on the demand. Thank you!
__________________
Exact Motorsports
907 Hanson Court
Milpitas, CA 95035
(408) 416 - 0061
(408) 263 - 8100
www.exactmotorsports.com
Exact Motorsports
907 Hanson Court
Milpitas, CA 95035
(408) 416 - 0061
(408) 263 - 8100
www.exactmotorsports.com
#7
John, has there been any changes since you installed Glen's?
Here's the link to the kit:
http://www.exactmotorsports.com/GScamberkits.html
Mike.
Here's the link to the kit:
http://www.exactmotorsports.com/GScamberkits.html
Mike.
Last edited by GSing430; 08-17-08 at 10:11 AM.
Trending Topics
#8
Club Lexus Vendor
Thread Starter
John, has there been any changes since you installed Glen's?
Here's the link to the kit:
http://www.exactmotorsports.com/GScamberkits.html
Mike.
Here's the link to the kit:
http://www.exactmotorsports.com/GScamberkits.html
Mike.
__________________
Exact Motorsports
907 Hanson Court
Milpitas, CA 95035
(408) 416 - 0061
(408) 263 - 8100
www.exactmotorsports.com
Exact Motorsports
907 Hanson Court
Milpitas, CA 95035
(408) 416 - 0061
(408) 263 - 8100
www.exactmotorsports.com
#9
Club Lexus Vendor
Thread Starter
#10
Lead Lap
iTrader: (3)
Join Date: Jul 2007
Location: Florida
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
And so I encountered a problem. While I received the correct product from Exact, I believe Sewell only ships out the more recent style balljoints that look like this:
Do you notice the small bump in the center? That's causing me to not be able to successfully mate the front RCA. I believe John (from Exact) said that it's the new design on the 01+ GS's.
Here, you can see it's slightly raised. On the 98-00 model GS, it's not raised, but rather flat.
I own a 99 GS. If I used the current balljoints (already on the car), the product would have fit perfectly. Since I received the updated balljoints (to replace old balljoints), I needed to get the camber kit made specifically for the 01+ GS's. This wasn't the case since I was under the impression that I was going to get the 99 GS balljoints (from Sewell) hence me stating on the order form (for the camber kit) I have a 99 GS. I spoke to John about my problem so I'm getting it exchanged. He's a good guy and is very helpful, by the way.
Please keep in mind I am not badmouthing Sewell OR Exact Motorsports. I am simply informing you guys of a possible "problem". Does it matter which balljoints you order or have? No. What matters is knowing which one you have on the car prior to purchasing the front RCAs (assuming you already replaced the balljoints).
As I mentioned earlier, I assume Sewell only ships out the more recent design balljoints. Even if you have a 98-00 GS, you may have replaced the balljoints that are used on the 01+. With that said, when purchasing the front RCAs, make sure you inform Exact about which design (balljoint) you have!
I left my camera at my cousin's house with my pics on it. Once I get it back, I will post them up. I hope I was able to explain the potential problem clearly for everyone to understand. Though it may be half past midnight, I am quite exhausted.
Layman's terms/Cliffnotes: If you replaced your balljoints and plan to buy a camber kit for the front from Exact, find out whether your balljoints look like the ones that are posted in this post (01+). If it has no bump in the middle, then you have the 98-00 GS balljoint. Though it is important you let them know what year GS you own, it is imperative both you and Exact Motorsports know which balljoints are installed so they can send you the right kit.
The pictures were taken from here.
Do you notice the small bump in the center? That's causing me to not be able to successfully mate the front RCA. I believe John (from Exact) said that it's the new design on the 01+ GS's.
Here, you can see it's slightly raised. On the 98-00 model GS, it's not raised, but rather flat.
I own a 99 GS. If I used the current balljoints (already on the car), the product would have fit perfectly. Since I received the updated balljoints (to replace old balljoints), I needed to get the camber kit made specifically for the 01+ GS's. This wasn't the case since I was under the impression that I was going to get the 99 GS balljoints (from Sewell) hence me stating on the order form (for the camber kit) I have a 99 GS. I spoke to John about my problem so I'm getting it exchanged. He's a good guy and is very helpful, by the way.
Please keep in mind I am not badmouthing Sewell OR Exact Motorsports. I am simply informing you guys of a possible "problem". Does it matter which balljoints you order or have? No. What matters is knowing which one you have on the car prior to purchasing the front RCAs (assuming you already replaced the balljoints).
As I mentioned earlier, I assume Sewell only ships out the more recent design balljoints. Even if you have a 98-00 GS, you may have replaced the balljoints that are used on the 01+. With that said, when purchasing the front RCAs, make sure you inform Exact about which design (balljoint) you have!
I left my camera at my cousin's house with my pics on it. Once I get it back, I will post them up. I hope I was able to explain the potential problem clearly for everyone to understand. Though it may be half past midnight, I am quite exhausted.
Layman's terms/Cliffnotes: If you replaced your balljoints and plan to buy a camber kit for the front from Exact, find out whether your balljoints look like the ones that are posted in this post (01+). If it has no bump in the middle, then you have the 98-00 GS balljoint. Though it is important you let them know what year GS you own, it is imperative both you and Exact Motorsports know which balljoints are installed so they can send you the right kit.
The pictures were taken from here.
#11
Club Lexus Vendor
Thread Starter
And so I encountered a problem. While I received the correct product from Exact, I believe Sewell only ships out the more recent style balljoints that look like this:
Do you notice the small bump in the center? That's causing me to not be able to successfully mate the front RCA. I believe John (from Exact) said that it's the new design on the 01+ GS's.
Here, you can see it's slightly raised. On the 98-00 model GS, it's not raised, but rather flat.
I own a 99 GS. If I used the current balljoints (already on the car), the product would have fit perfectly. Since I received the updated balljoints (to replace old balljoints), I needed to get the camber kit made specifically for the 01+ GS's. This wasn't the case since I was under the impression that I was going to get the 99 GS balljoints (from Sewell) hence me stating on the order form (for the camber kit) I have a 99 GS. I spoke to John about my problem so I'm getting it exchanged. He's a good guy and is very helpful, by the way.
Please keep in mind I am not badmouthing Sewell OR Exact Motorsports. I am simply informing you guys of a possible "problem". Does it matter which balljoints you order or have? No. What matters is knowing which one you have on the car prior to purchasing the front RCAs (assuming you already replaced the balljoints).
As I mentioned earlier, I assume Sewell only ships out the more recent design balljoints. Even if you have a 98-00 GS, you may have replaced the balljoints that are used on the 01+. With that said, when purchasing the front RCAs, make sure you inform Exact about which design (balljoint) you have!
I left my camera at my cousin's house with my pics on it. Once I get it back, I will post them up. I hope I was able to explain the potential problem clearly for everyone to understand. Though it may be half past midnight, I am quite exhausted.
Layman's terms/Cliffnotes: If you replaced your balljoints and plan to buy a camber kit for the front from Exact, find out whether your balljoints look like the ones that are posted in this post (01+). If it has no bump in the middle, then you have the 98-00 GS balljoint. Though it is important you let them know what year GS you own, it is imperative both you and Exact Motorsports know which balljoints are installed so they can send you the right kit.
The pictures were taken from here.
Do you notice the small bump in the center? That's causing me to not be able to successfully mate the front RCA. I believe John (from Exact) said that it's the new design on the 01+ GS's.
Here, you can see it's slightly raised. On the 98-00 model GS, it's not raised, but rather flat.
I own a 99 GS. If I used the current balljoints (already on the car), the product would have fit perfectly. Since I received the updated balljoints (to replace old balljoints), I needed to get the camber kit made specifically for the 01+ GS's. This wasn't the case since I was under the impression that I was going to get the 99 GS balljoints (from Sewell) hence me stating on the order form (for the camber kit) I have a 99 GS. I spoke to John about my problem so I'm getting it exchanged. He's a good guy and is very helpful, by the way.
Please keep in mind I am not badmouthing Sewell OR Exact Motorsports. I am simply informing you guys of a possible "problem". Does it matter which balljoints you order or have? No. What matters is knowing which one you have on the car prior to purchasing the front RCAs (assuming you already replaced the balljoints).
As I mentioned earlier, I assume Sewell only ships out the more recent design balljoints. Even if you have a 98-00 GS, you may have replaced the balljoints that are used on the 01+. With that said, when purchasing the front RCAs, make sure you inform Exact about which design (balljoint) you have!
I left my camera at my cousin's house with my pics on it. Once I get it back, I will post them up. I hope I was able to explain the potential problem clearly for everyone to understand. Though it may be half past midnight, I am quite exhausted.
Layman's terms/Cliffnotes: If you replaced your balljoints and plan to buy a camber kit for the front from Exact, find out whether your balljoints look like the ones that are posted in this post (01+). If it has no bump in the middle, then you have the 98-00 GS balljoint. Though it is important you let them know what year GS you own, it is imperative both you and Exact Motorsports know which balljoints are installed so they can send you the right kit.
The pictures were taken from here.
__________________
Exact Motorsports
907 Hanson Court
Milpitas, CA 95035
(408) 416 - 0061
(408) 263 - 8100
www.exactmotorsports.com
Exact Motorsports
907 Hanson Court
Milpitas, CA 95035
(408) 416 - 0061
(408) 263 - 8100
www.exactmotorsports.com
#12
Lead Lap
iTrader: (3)
Join Date: Jul 2007
Location: Florida
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
And so I encountered yet another problem! Haha well, for anybody that plans to buy the front RCAs, you MUST HAVE 17" wheels or larger otherwise the tie rod will scrape against your wheel! I have the OEM 16" wheels:
#14
Lead Lap
iTrader: (3)
Join Date: Jul 2007
Location: Florida
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I plan on getting wheels so I figured I'd "prepare" myself for it haha. Yeah, they're 1" thick. You need a huge allen tool to screw it in too. Oh well. At least I have new balljoints now. I also raised the car a little so that will reduce the camber.
I haven't bothered installing the rears either. With the look I am trying to achieve, I may not even use it and will probably sell it. We'll see though..
I haven't bothered installing the rears either. With the look I am trying to achieve, I may not even use it and will probably sell it. We'll see though..