**iFORGED WHEELS GROUP BUY, Ends 7-31-05**
#1
Former Sponsor
Thread Starter
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
**iFORGED WHEELS GROUP BUY, Ends 7-31-05**
Hello all,
Back by POPULAR DEMAND, its time for the 2005 iFORGED PERFORMANCE ALLOY WHEELS GROUP BUY!!! The LAST GB WAS 9-13-04 , and alot of people let it pass, thinking there would another one in 2 months! That obviously did not occur. There will not be another GB on iFORGED for the remainder of 2005.
ORDER PROCESS
The maximum order limit is 20 sets. When I have 20 confirmed orders, I will collect payment for all wheels, and send a batch order for all sets to iFORGED for processing. No cards will be charged, or payment colletcted until the GB is confirmed and order minimum is met. All orders will be tracked by D2-AUTOSPORT.
THIS GROUP BUY WILL END ON 7-31-05
To place an order CLICK HERE TO DOWNLOAD THE ORDER FORM , fill it out in its entirety (you can leave offset portion blank , we will handle it.) Upon completion of the form, fax it to 203-440-4795. This will confirm you order.
For other inquiries, SEND A EMAIL , or AOL INSTANT MESSAGE, for this sort of bulk promotion, these are the best methods of contact.
Visa, Mastercard, or Bank Check / Money Order are accepted. (add 2.3% for CC processing)
FAQ
WHAT IS THE DIFFERENCE BETWEEN 2pc AND 3pc?
2pc and 3pc use the same materials and manufacturing processes, the 2pc is 1 outer barrel and a center disk (face), whereas 3pc is 2 outer barrels (inside and outer lip) and a center disk (face). 2pc and 3pc look identical when you order the 2pc with rivets. For those that prefer the cleaner, "boltless" look, simply order the 2pc non-rivet. In 99% of applications, a larger lip (front and rear) is yielded from 2pc . 2pc has same strength, quality and durability as 3pc, there are simply limited widths with 2pc (see below). 2pc will yield a incrementally larger rear lip ithan 3pc n 99% of applications (.25-.50")
HOW WILL I KNOW WHATS GOING ON WITH MY ORDER?
As with all D2-AUTOSPORT clients, Group Buy Participants will receieve a bi-weekly email update to inform them of the status of their respective order. As always there will be someone availible via email or AOL IM at almost all times to field individual inquiries also.
HOW MUCH IS SHIPPING??
Shipping is $80-120.00 Depending On Location For 1 Set Of Wheels
WHAT IS THE DIFFERENCE BETWEEN PRECISION FIT & EXTREME FIT FORGING?
Precision Fit is the "standard" forging used on iFORGED wheels. The Extreme Fit forging is a new for 2005 process that yields a 1" larger lip with the exact same specifcations. For example a 20x10 wheel with GS offset normally has a 3" lip, with Extreme Fit that same wheel has a 4" lip. Please note, EXTREME FIT FORGING IS ONLY AVAILIBLE ON THE ESSEN, TRIAL, DAYTONA, & VARIANT MODELS, in 19 and 20" (pics below)
I DON'T SEE CHROME OFFERED, WHAT IF I WANT THE SHINY CHROME LOOK?
For those that want a lusterous looking wheel, we recomemend hi-polished. If you also want to add easy maintenece of chrome, purchase the duraclearcoat option. The wheel will the same luster and the easy maintenence. CLICK HERE FOR A PIC OF HI-POLISHED
WHAT DOES STEP LIP LOOK LIKE?
Please scroll to the bottom of this post for a example on the Audi A4
ARE STEP LIPS AVAILIBLE? CAN GET EXTREME FIT FORGING WITH STEP LIPS?
Step lip is availible in 2pc only
18x8 , 18x9.5
20x8, 20x9.5
You can get the Extreme Fit Forging with Step lips, the rear lip will be approx 4-4.25". The same pricing as the reverse lip 2pc applies (see below)
PRODUCTION TIMES:
Silver, Black, Gunmetal, Hi-Polished -6-8weeks
Brushed Aluminum, Clearcoat Hi-Polished - 8-10weeks
OPTIONS:
BRUSHED ALUMINUM - $300.00 per set (includes DuraClearcoat)
DURACLEARCOAT - $200.00 per set
NEW CNC ETCHED CENTERCAPS - $100.00 per set.
Thank you in advance for your business,
Derrick Williams
PRICING: **PLEASE EMAIL FOR PRICING**
2 PC. - Precision Fit Forging - add RIVETS for NO CHARGE!
18x8, 18x9, 18x10"
19x8, 19x10"
20x8.5, 20x10"
2 PC. - EXTREME Fit Forging - add RIVETS for NO CHARGE!
19x8 , 19x10"
20x8.5 , 20x10
3 PC. - PRECISION FIT FORGING , add $30.00 per inch/per wheel for wider widths
18x8.5, 18x10"
19x8.5, 19x10"
20x8.5, 20x10"
3 PC. - EXTREME FIT FORGING, add $30.00 per inch/per wheel for wider widths
19x8.5 , 19x10
20x8.5, 20x10
Here's a pic of each wheel style:
PRECISION FIT FORGING MODELS
CLASSIC
EQUIP - 2PC ONLY NOT AVAILIBLE WITH RIVETS!
EXTREME FIT FORGING MODELS
DAYTONA - 7-SPLIT SPOKE
ESSEN - MESH
TRIAL - 5 SPOKE
VARIANT - TURNED 5 SPOKE
NEW CNC ETCHED CENTERCAP (optional)
EXAMPLE PIC OF STEPPED LIP
Back by POPULAR DEMAND, its time for the 2005 iFORGED PERFORMANCE ALLOY WHEELS GROUP BUY!!! The LAST GB WAS 9-13-04 , and alot of people let it pass, thinking there would another one in 2 months! That obviously did not occur. There will not be another GB on iFORGED for the remainder of 2005.
ORDER PROCESS
The maximum order limit is 20 sets. When I have 20 confirmed orders, I will collect payment for all wheels, and send a batch order for all sets to iFORGED for processing. No cards will be charged, or payment colletcted until the GB is confirmed and order minimum is met. All orders will be tracked by D2-AUTOSPORT.
THIS GROUP BUY WILL END ON 7-31-05
To place an order CLICK HERE TO DOWNLOAD THE ORDER FORM , fill it out in its entirety (you can leave offset portion blank , we will handle it.) Upon completion of the form, fax it to 203-440-4795. This will confirm you order.
For other inquiries, SEND A EMAIL , or AOL INSTANT MESSAGE, for this sort of bulk promotion, these are the best methods of contact.
Visa, Mastercard, or Bank Check / Money Order are accepted. (add 2.3% for CC processing)
FAQ
WHAT IS THE DIFFERENCE BETWEEN 2pc AND 3pc?
2pc and 3pc use the same materials and manufacturing processes, the 2pc is 1 outer barrel and a center disk (face), whereas 3pc is 2 outer barrels (inside and outer lip) and a center disk (face). 2pc and 3pc look identical when you order the 2pc with rivets. For those that prefer the cleaner, "boltless" look, simply order the 2pc non-rivet. In 99% of applications, a larger lip (front and rear) is yielded from 2pc . 2pc has same strength, quality and durability as 3pc, there are simply limited widths with 2pc (see below). 2pc will yield a incrementally larger rear lip ithan 3pc n 99% of applications (.25-.50")
HOW WILL I KNOW WHATS GOING ON WITH MY ORDER?
As with all D2-AUTOSPORT clients, Group Buy Participants will receieve a bi-weekly email update to inform them of the status of their respective order. As always there will be someone availible via email or AOL IM at almost all times to field individual inquiries also.
HOW MUCH IS SHIPPING??
Shipping is $80-120.00 Depending On Location For 1 Set Of Wheels
WHAT IS THE DIFFERENCE BETWEEN PRECISION FIT & EXTREME FIT FORGING?
Precision Fit is the "standard" forging used on iFORGED wheels. The Extreme Fit forging is a new for 2005 process that yields a 1" larger lip with the exact same specifcations. For example a 20x10 wheel with GS offset normally has a 3" lip, with Extreme Fit that same wheel has a 4" lip. Please note, EXTREME FIT FORGING IS ONLY AVAILIBLE ON THE ESSEN, TRIAL, DAYTONA, & VARIANT MODELS, in 19 and 20" (pics below)
I DON'T SEE CHROME OFFERED, WHAT IF I WANT THE SHINY CHROME LOOK?
For those that want a lusterous looking wheel, we recomemend hi-polished. If you also want to add easy maintenece of chrome, purchase the duraclearcoat option. The wheel will the same luster and the easy maintenence. CLICK HERE FOR A PIC OF HI-POLISHED
WHAT DOES STEP LIP LOOK LIKE?
Please scroll to the bottom of this post for a example on the Audi A4
ARE STEP LIPS AVAILIBLE? CAN GET EXTREME FIT FORGING WITH STEP LIPS?
Step lip is availible in 2pc only
18x8 , 18x9.5
20x8, 20x9.5
You can get the Extreme Fit Forging with Step lips, the rear lip will be approx 4-4.25". The same pricing as the reverse lip 2pc applies (see below)
PRODUCTION TIMES:
Silver, Black, Gunmetal, Hi-Polished -6-8weeks
Brushed Aluminum, Clearcoat Hi-Polished - 8-10weeks
OPTIONS:
BRUSHED ALUMINUM - $300.00 per set (includes DuraClearcoat)
DURACLEARCOAT - $200.00 per set
NEW CNC ETCHED CENTERCAPS - $100.00 per set.
Thank you in advance for your business,
Derrick Williams
PRICING: **PLEASE EMAIL FOR PRICING**
2 PC. - Precision Fit Forging - add RIVETS for NO CHARGE!
18x8, 18x9, 18x10"
19x8, 19x10"
20x8.5, 20x10"
2 PC. - EXTREME Fit Forging - add RIVETS for NO CHARGE!
19x8 , 19x10"
20x8.5 , 20x10
3 PC. - PRECISION FIT FORGING , add $30.00 per inch/per wheel for wider widths
18x8.5, 18x10"
19x8.5, 19x10"
20x8.5, 20x10"
3 PC. - EXTREME FIT FORGING, add $30.00 per inch/per wheel for wider widths
19x8.5 , 19x10
20x8.5, 20x10
Here's a pic of each wheel style:
PRECISION FIT FORGING MODELS
CLASSIC
EQUIP - 2PC ONLY NOT AVAILIBLE WITH RIVETS!
EXTREME FIT FORGING MODELS
DAYTONA - 7-SPLIT SPOKE
ESSEN - MESH
TRIAL - 5 SPOKE
VARIANT - TURNED 5 SPOKE
NEW CNC ETCHED CENTERCAP (optional)
EXAMPLE PIC OF STEPPED LIP
Last edited by D2-AUTOSPORT; 11-09-05 at 04:06 PM.
#3
Former Sponsor
Thread Starter
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by varcity64
hmm no chrome???
For those that do not know, this is what hi-polished looks like
Last edited by D2-AUTOSPORT; 06-23-05 at 11:11 PM.
#5
Former Sponsor
Thread Starter
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 49IS300
Derrick,
As for the clearcoat option is that applied to the lips, face, or both??
As for the clearcoat option is that applied to the lips, face, or both??
Last edited by D2-AUTOSPORT; 06-24-05 at 12:10 AM.
#7
G35x - RWD/AWD goodness
Oh no… now I have to sell a kidney!!! I don’t want to miss out on the group buy this time around.
This is what happens when you look at a few pages of D2’s new Project Celsior and notice that there’s something new in his sig.
This is what happens when you look at a few pages of D2’s new Project Celsior and notice that there’s something new in his sig.
Trending Topics
#8
Advanced
Wheels
What are the cnc forged centercaps? Are you saying that the centercaps are extra, and not included? I can't make up my mind between the Aero's, and Seneka's in a 18inch 2-piece design, how wide are the lips in a 18x8, and 18x9 configuration??
Last edited by trent; 06-24-05 at 02:23 PM.
#10
Former Sponsor
Thread Starter
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by trent
What are the cnc forged centercaps? Are you saying that the centercaps are extra, and not included? I can't make up my mind between the Aero's, and Seneka's in a 18inch 2-piece design, how wide are the lips in a 18x8, and 18x9 configuration??
#11
Lexus Test Driver
Join Date: Jan 2005
Location: Massachusetts
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
OMG those Trial 5 spokes are sick in hi-polished. The Variant turned 5 spokes are pretty nice too. Would either of these work for my ES D? Probably have to do 18's. Whats your opinion?
Edit: The GB ends on my b-day. That would be a pretty nice present to myself.
Edit: The GB ends on my b-day. That would be a pretty nice present to myself.
#14
Former Sponsor
Thread Starter
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by superpats
OMG those Trial 5 spokes are sick in hi-polished. The Variant turned 5 spokes are pretty nice too. Would either of these work for my ES D? Probably have to do 18's. Whats your opinion?
Edit: The GB ends on my b-day. That would be a pretty nice present to myself.
Edit: The GB ends on my b-day. That would be a pretty nice present to myself.