STILLEN 3IS Rear Diffuser Announcement!!!
The following users liked this post:
T03 (01-24-20)
#18
Former Sponsor
Thread Starter
We include instructions with the part. The instructions will probably be from our Q50 diffuser, but it is basically the same installation process. We are still finishing up the Lexus specific one with proper pictures. It goes over the stock piece (no removal).
#19
Driver
iTrader: (2)
Just installed mine with the ark exhaust and it fits, only issue like other people the top middle doesn't snug up tight I tried multiple times and if u want it perfect on the corners the middle will have a small gap, also trying to get screws into it with a lowered car is impossible lol
#20
Former Sponsor
Thread Starter
Just installed mine with the ark exhaust and it fits, only issue like other people the top middle doesn't snug up tight I tried multiple times and if u want it perfect on the corners the middle will have a small gap, also trying to get screws into it with a lowered car is impossible lol
#24
Im waiting fixed one also
#27
Former Sponsor
Thread Starter
We just did a test fitting and mounting. The diffuser fits correctly and no gap, but you have to install it in the right order. We will be doing an install tomorrow with an instructional video to help people out.
I apologize for not having better instructions when these first went out. Anyone that has one that has had an issues with the gap should reinstall it following the instructions we will post. We will send replacement tape and adhesion promoter free of charge.
I will post pictures shortly of the test fit.
I apologize for not having better instructions when these first went out. Anyone that has one that has had an issues with the gap should reinstall it following the instructions we will post. We will send replacement tape and adhesion promoter free of charge.
I will post pictures shortly of the test fit.
#29
Former Sponsor
Thread Starter
Here are some pictures of the fitment. We will be making an install video tomorrow and hopefully will have that finished quickly. I will also be working on a written install guide to help people who already have one and don't want to wait for the video.
Thanks i2fat for coming down for the fitting.
Thanks i2fat for coming down for the fitting.
#30
DIY Install
I was able to get it installed with a little help from some painters tape and starting on one side, then affixing it from the middle back to either side. I'm completely satisfied with the fitment. Thanks, Stillen!