My 12 Matador Red IS250 AWD BUILD (Toronto)
#47
Driver School Candidate
Thread Starter
when it comes to RWD it is easier to run more off a staggered setup with less issue. While with a AWD setup its harder to run a staggered setup because the rolling diameter needs to be the same for all four wheels or off by 0.01 I believe for it to work. I personally prefer to run a squared setup with spacers to give it more of a nice look.
The following users liked this post:
TMA1111 (02-25-17)
The following users liked this post:
TMA1111 (02-25-17)
#53
Driver School Candidate
Thread Starter
I actually got the spoiler off ebay about a year ago. with the fitment it was pretty good. I advise heating it and pushing it down or putting something on the edges to keep it in place and using some double sided tape to hold it on.
#55
Driver School Candidate
Thread Starter
2017 Updated
This year I didn't do much, besides just swapping my coilovers with airlift 3p system. Overall I can say the drive is amazing on bags and very comfortable as a daily summer car it makes it so easy to go over speed bumps or deal with inclines in the road and parking the car an walking away is so much sweeter.
Next year I am planning of going with some more aggressive wheels thinking of running 18X10.5 with a +24 offset in the front and +22 offset in the rear. Also a new front lip I bought this year that I unfortunately didn't get to paint on time. As well as install some fsport sway bars and camber kit I had acquired this past fall. Even looking into possibly running two custom subs in the trunk and upgrading the tank setup as well.
If you to follow more updates on the build checkout my instagram: tma_killa
Next year I am planning of going with some more aggressive wheels thinking of running 18X10.5 with a +24 offset in the front and +22 offset in the rear. Also a new front lip I bought this year that I unfortunately didn't get to paint on time. As well as install some fsport sway bars and camber kit I had acquired this past fall. Even looking into possibly running two custom subs in the trunk and upgrading the tank setup as well.
If you to follow more updates on the build checkout my instagram: tma_killa
The following users liked this post:
TMA1111 (11-07-17)
#57
Driver School Candidate
Thread Starter
2018 Update
Hi All,
Just thought I would share an update on my car for this year.
This year I got a new set of wheels some Weds Orden's, a new front and rear lip which I molded to the car, and installed some suspension components as well.
Just thought I would share an update on my car for this year.
This year I got a new set of wheels some Weds Orden's, a new front and rear lip which I molded to the car, and installed some suspension components as well.
Thread
Thread Starter
Forum
Replies
Last Post
JosephN
IS - 2nd Gen (2006-2013)
22
05-25-12 10:07 AM
Scottina08
IS - 2nd Gen (2006-2013)
22
12-24-07 07:31 PM