Steering wheel swap
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2014
Location: AZ
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Steering wheel swap
Just installed the blue stitched flat bottom steering wheel along with the ISF titanium shift paddles along with swapping out the cruise control switch and adding the Sewell purchased counter weight for steering wheel vibration. This included the air bag swap from the old steering wheel to the new one with out disconnecting the battery or turning the ignition on. I used a steering wheel puller to remove the old steering wheel and made sure the wheels were straight before removing the old steering wheel. After the air bag screws are removed the rest of the removal is pretty simple, just swapping the parts. (2 #10 torx screws behind 2 square plastic covers on opposite sides of the steering wheel were removed using the interior plastic tool and pried away. About the only tool besides the steering wheel puller used was a Phillips screw driver) Total swap time was about 35 mins.
Last edited by SeaaDucer; 08-28-14 at 12:08 PM. Reason: Posted in wrong place
Thread
Thread Starter
Forum
Replies
Last Post
kendre
GS - 2nd Gen (1998-2005)
5
04-27-06 02:13 PM