MN 2JZ-GTE/R154 Swap
#1
Pole Position
Thread Starter
MN 2JZ-GTE/R154 Swap
Hello CL,
I purchased my GS back in Feb 2014, and I immediately started searching for local members that had either done the same swap or could direct me to someone. I was fortunate to find local members that did just that, like Mr.Gs_GTE and denut-L. Now I am just collecting parts until I have everything I need to get the swap done.
This is my GS
I also got a handbrake from a sc300, it slipped right in. Nice mock up
R154 purchased from AZTurbo
Wheel adapters to fit style 95 bmw wheels
Before and after pictures of the wheels. Before they were refinished they were looking pretty crappy
Muteki neo chrome lug nuts
And I got this today
plus some more parts. I still have a long way to go, maybe 20 more parts befor things can start.
I purchased my GS back in Feb 2014, and I immediately started searching for local members that had either done the same swap or could direct me to someone. I was fortunate to find local members that did just that, like Mr.Gs_GTE and denut-L. Now I am just collecting parts until I have everything I need to get the swap done.
This is my GS
I also got a handbrake from a sc300, it slipped right in. Nice mock up
R154 purchased from AZTurbo
Wheel adapters to fit style 95 bmw wheels
Before and after pictures of the wheels. Before they were refinished they were looking pretty crappy
Muteki neo chrome lug nuts
And I got this today
plus some more parts. I still have a long way to go, maybe 20 more parts befor things can start.
Last edited by ELLeon; 08-16-14 at 04:44 AM.
#6
Pole Position
Thread Starter
Trending Topics
#10
Pole Position
Thread Starter
Thanks mccrimmon,
I don't know a lot about the 2JZ's I am learning still. The one who will be doing most of the work will I try to assist where I can, member Mr.Gs_GTE will be doing the majority of the swap. I'll try to learn more while that happens.
I don't know a lot about the 2JZ's I am learning still. The one who will be doing most of the work will I try to assist where I can, member Mr.Gs_GTE will be doing the majority of the swap. I'll try to learn more while that happens.
#11
Racer
Sweet!I just did this same swap in a 1st gen.
#14
Racer
Yeah I did the R154 swap first and ran it on a stock 2jzge motor for a while until that rod knocked. I just completely my 2jzgte vvti swap a couple days ago. Still got stuff to do lol
Edit: Just some advice... My valve cover seals and maybe vvt-i cam o-ring are leaking so you might want to do that while the motors out. Also, if you pull off the oil filter sandwich plate ( to change motor mount locations if need be ).. Remember to replace this o-ring, I didn't and I got a leak now.
Edit: Just some advice... My valve cover seals and maybe vvt-i cam o-ring are leaking so you might want to do that while the motors out. Also, if you pull off the oil filter sandwich plate ( to change motor mount locations if need be ).. Remember to replace this o-ring, I didn't and I got a leak now.