Super Star UCF20 Build
#1
Rookie
Thread Starter
Super Star UCF20 Build
Figured I would start a build thread to show you guys what we're working on for 2014. Sorry in advance for the mostly iphone/instagram pictures.
I'll start off from the beginning and bring you up to date. Started off with the suspension. BC/UAS setup and Megan arms in the rear. Cut the shock towers in the front and had it sitting pretty much where I wanted it.
Found a great deal on some Weds Kranze Cerberus so I refinished and relip'd them to 18x10/11. Got the front sitting flush with a spacer and tucked the rears and rocked this look last year.
Got pretty bored with the look and decided I wanted to go a lot further so I picked up a daily and started gathering parts for the build.
New additions for next year:
- Wald Sportsline kit
- SSR SP3's 19x10.5/11.5 (5.5 and 6.5" lips)
- LED tails
- Clazzio seat covers
- 326 Power Front RCA's
- Full repaint with radius'd and flared fenders
My seats were torn and gross so these really brought the interior back to life. And they're a darker color which is pretty cool. Still some wrinkles in the pictures but they're mostly gone now.
Test fitted the wheels and kit
Lots of cutting and hammering later we got the rear sitting where I want and stocked to mock up the fender flare. Should be about a 2.5-3" radius.
Lots more to come!
I'll start off from the beginning and bring you up to date. Started off with the suspension. BC/UAS setup and Megan arms in the rear. Cut the shock towers in the front and had it sitting pretty much where I wanted it.
Found a great deal on some Weds Kranze Cerberus so I refinished and relip'd them to 18x10/11. Got the front sitting flush with a spacer and tucked the rears and rocked this look last year.
Got pretty bored with the look and decided I wanted to go a lot further so I picked up a daily and started gathering parts for the build.
New additions for next year:
- Wald Sportsline kit
- SSR SP3's 19x10.5/11.5 (5.5 and 6.5" lips)
- LED tails
- Clazzio seat covers
- 326 Power Front RCA's
- Full repaint with radius'd and flared fenders
My seats were torn and gross so these really brought the interior back to life. And they're a darker color which is pretty cool. Still some wrinkles in the pictures but they're mostly gone now.
Test fitted the wheels and kit
Lots of cutting and hammering later we got the rear sitting where I want and stocked to mock up the fender flare. Should be about a 2.5-3" radius.
Lots more to come!
#2
OK first let me preface these questions by stating for the record that I am:
A) Older (44)
B) Probably out of touch with some car trends
C) Not judging at all
But I have to ask:
- How do you drive a car like that without bent rims, body damage and early suspension problems?
- Isn't the ride much worse than stock?
That said I really like your seat covers! First time I have seen seat covers that I liked. Do you mind if I ask the cost and how difficult is install?
So yeah get off my lawn, stay outta my rose bushes, et al
For the record, I do not feel that old and the Amon Amarth death metal I am listening to while typing this says hello
A) Older (44)
B) Probably out of touch with some car trends
C) Not judging at all
But I have to ask:
- How do you drive a car like that without bent rims, body damage and early suspension problems?
- Isn't the ride much worse than stock?
That said I really like your seat covers! First time I have seen seat covers that I liked. Do you mind if I ask the cost and how difficult is install?
So yeah get off my lawn, stay outta my rose bushes, et al
For the record, I do not feel that old and the Amon Amarth death metal I am listening to while typing this says hello
#3
sick!!!
sayow- everything can be sacrificed for the intended result!
also i had clazzios in my scion tc and they were awsome perfect fittment and easy to install been trying to find them for 1st gens.
sayow- everything can be sacrificed for the intended result!
also i had clazzios in my scion tc and they were awsome perfect fittment and easy to install been trying to find them for 1st gens.
#4
Lexus Test Driver
iTrader: (1)
OK first let me preface these questions by stating for the record that I am:
A) Older (44)
B) Probably out of touch with some car trends
C) Not judging at all
But I have to ask:
- How do you drive a car like that without bent rims, body damage and early suspension problems?
- Isn't the ride much worse than stock?
That said I really like your seat covers! First time I have seen seat covers that I liked. Do you mind if I ask the cost and how difficult is install?
So yeah get off my lawn, stay outta my rose bushes, et al
For the record, I do not feel that old and the Amon Amarth death metal I am listening to while typing this says hello
A) Older (44)
B) Probably out of touch with some car trends
C) Not judging at all
But I have to ask:
- How do you drive a car like that without bent rims, body damage and early suspension problems?
- Isn't the ride much worse than stock?
That said I really like your seat covers! First time I have seen seat covers that I liked. Do you mind if I ask the cost and how difficult is install?
So yeah get off my lawn, stay outta my rose bushes, et al
For the record, I do not feel that old and the Amon Amarth death metal I am listening to while typing this says hello
Speaking of which, let's see that trunk setup!
#5
Rookie
Thread Starter
I think retail is around $400. I came across these used and Japan for a pretty good price. Install is not bad at all.
#7
Rookie
Thread Starter
Frame work for the flares coming together. This really shows how much it's radius'd.
Got my 326 Power RCA's in. Very quality pieces, well worth the money.
Front camber
Girlfriend hooked it up for Christmas with a Wald hood emblem. And it's black chrome and black to match the wheels!
Front flare mocked up roughly. bottom will come in a lot more to flow into the bumper.
Got my 326 Power RCA's in. Very quality pieces, well worth the money.
Front camber
Girlfriend hooked it up for Christmas with a Wald hood emblem. And it's black chrome and black to match the wheels!
Front flare mocked up roughly. bottom will come in a lot more to flow into the bumper.
Trending Topics
#10
ive ALWAYS loved and admired this car from the beginning..doing it right since the get-go =]
cant wait to see how this whole VIPGT look comes out...wish i had the money to be up to par lol
that raidus into the door is guna be sick
guna be following this like a hawk for constant inspiration<3
cant wait to see how this whole VIPGT look comes out...wish i had the money to be up to par lol
that raidus into the door is guna be sick
guna be following this like a hawk for constant inspiration<3
#15