Lexus SC400/530
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2013
Location: ok
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Lexus SC400/530
So I picked up this lexus SC400 from an old lady It was a 1 owner garage kept lexus with almost 200k miles on it
From the day I got the car i knew the rims had to go so I hopped on CL and found these IS250 rims for really cheap and i hopped on them
Shortly after that i got some used lowering springs and I traded the lexus rims to a friend for some LMGT4's that had really really bad curb rash and I took them in to get repaired
after all that i was happy with how the car looked and I decided to do some big boy stuff and went out and picked me up one of these babies
And since this is going to be a street/strip car i decided to go with a th400 that i picked up for really cheap and had it rebuilt
as of right now thats where im sitting with the car still gathering parts hopefully have the engine mounts fabbed up and engine mocked inside the car by the end of the month
From the day I got the car i knew the rims had to go so I hopped on CL and found these IS250 rims for really cheap and i hopped on them
Shortly after that i got some used lowering springs and I traded the lexus rims to a friend for some LMGT4's that had really really bad curb rash and I took them in to get repaired
after all that i was happy with how the car looked and I decided to do some big boy stuff and went out and picked me up one of these babies
And since this is going to be a street/strip car i decided to go with a th400 that i picked up for really cheap and had it rebuilt
as of right now thats where im sitting with the car still gathering parts hopefully have the engine mounts fabbed up and engine mocked inside the car by the end of the month
#3
Driver School Candidate
Thread Starter
Join Date: Mar 2013
Location: ok
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
i actually have a couple questions already.. like oil pan clearance if there is any issues with that. if there are any problems with running stock radiator. and i haven't figured out what to do about a shifter yet i would like to if possible keep the stock shifter but i'm sure the points are different
#7
Lexus Champion
iTrader: (18)
i actually have a couple questions already.. like oil pan clearance if there is any issues with that. if there are any problems with running stock radiator. and i haven't figured out what to do about a shifter yet i would like to if possible keep the stock shifter but i'm sure the points are different
As for the shifter, that one you would want to message milltertime. He's using an auto trans, so he could direct you for the linkage. But Im sure it wouldnt be too hard to fab something up.
Do it, its well worth it. Check the video in my build thread, its convincing enough
Trending Topics
#8
Driver School Candidate
Thread Starter
Join Date: Mar 2013
Location: ok
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man! haven't even got the 1uz out of my car yet im just getting everything ready prolly going to pull it out next week sometime. you run into any other surprises i need to know about
#10
Lexus Champion
iTrader: (18)
Fuel filter: GM Part#10299146 (or Wix 33737)
You will need some fittings to make it work, other than that its a straight forward deal unless you would like to fab up your own fuel system. Not sure about your trans length vs. the T56, but those of us with the swap already were able to use the stock F-Body driveshaft with the Driftmotion DS adapter and a couple other parts.
Ill drop you a PM in a bit, but hope that helps out for now
Last edited by turbodremz; 06-10-13 at 08:04 PM.
#11
Driver School Candidate
Thread Starter
Join Date: Mar 2013
Location: ok
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Got another thing checked off my list of parts i need
Thanks a million I feel alot better going into this after talking to you and miller time!
a free brand haha! I honestly don't know they were given to me they are red springs if that helps as the the LM's they are 18x8.5 front and 18x9.5 rear
Not really. PSI Conversion harness is your friend, along with the correct C5 Vette fuel filter. These 2 things will make life easier, and allow you to keep the return style fuel system and use the stock LS1 fuel rail.
Fuel filter: GM Part#10299146 (or Wix 33737)
You will need some fittings to make it work, other than that its a straight forward deal unless you would like to fab up your own fuel system. Not sure about your trans length vs. the T56, but those of us with the swap already were able to use the stock F-Body driveshaft with the Driftmotion DS adapter and a couple other parts.
Ill drop you a PM in a bit, but hope that helps out for now
Fuel filter: GM Part#10299146 (or Wix 33737)
You will need some fittings to make it work, other than that its a straight forward deal unless you would like to fab up your own fuel system. Not sure about your trans length vs. the T56, but those of us with the swap already were able to use the stock F-Body driveshaft with the Driftmotion DS adapter and a couple other parts.
Ill drop you a PM in a bit, but hope that helps out for now
a free brand haha! I honestly don't know they were given to me they are red springs if that helps as the the LM's they are 18x8.5 front and 18x9.5 rear
Last edited by UsedFish; 06-11-13 at 05:33 PM.
#12
Driver School Candidate
Thread Starter
Join Date: Mar 2013
Location: ok
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Haven't gotten much physically done but i did come across a sweet deal that is going to change my build just a little bit... I just picked up a TVS 1900 supercharger kit for the 5.3!!
#14
Driver School Candidate
Thread Starter
Join Date: Mar 2013
Location: ok
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Well finally got some time to work on the car and Decided not to go supercharge the 5.3 but stick with the original plan of using Nitrous so back to tackling the biggest headache so far which has been getting everything to work with the LS1 intake so i ordered the waterpump spacers to use an ls1 waterpump with the 5.3 accessories
And then we had to tackle the alternator bracket problem i didnt want to spend 300 dollars on the kwik bracket so we decided to try and make an offset plate to run the factory alternator and PS mount
(Sorry for the crappy pic but phone was almost dead and flash wasnt working will take better pics when i get back to the shop)
and my f-body oil pan finally came in
And then we had to tackle the alternator bracket problem i didnt want to spend 300 dollars on the kwik bracket so we decided to try and make an offset plate to run the factory alternator and PS mount
(Sorry for the crappy pic but phone was almost dead and flash wasnt working will take better pics when i get back to the shop)
and my f-body oil pan finally came in
Last edited by UsedFish; 07-04-13 at 08:04 AM.