Bob4256's SGM Build Thread
03-10-15, 08:49 PM
#362
Driver School Candidate
iTrader: (1)
Join Date: May 2010
Location: Utah
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I know this is an old thread but wanted to know what mirrors are on your car?
Also, I love those Velgen VMB5, I need to get a set in silver.
Thanks in advance
Also, I love those Velgen VMB5, I need to get a set in silver.
Thanks in advance
03-13-15, 07:20 AM
#364
03-16-15, 02:38 PM
#365
Driver School Candidate
iTrader: (1)
Join Date: May 2010
Location: Utah
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Agree, I think I'll order these this spring.
@Velgen - do you sell direct or just through distributors? Looking at your website it looks like only distributors.
@Bob, any feedback with the 20's? With lowering the car did you have to roll the fenders? Do they rub when turning @20's?
Just trying to understand fitment of the 20's. Sorry to bring up an old thread BoB, but your car looks fantastic and I would love to do the same offset/size of wheel. Just trying to get some feedback.
Again, any advise is appreciated.
@Velgen - do you sell direct or just through distributors? Looking at your website it looks like only distributors.
@Bob, any feedback with the 20's? With lowering the car did you have to roll the fenders? Do they rub when turning @20's?
Just trying to understand fitment of the 20's. Sorry to bring up an old thread BoB, but your car looks fantastic and I would love to do the same offset/size of wheel. Just trying to get some feedback.
Again, any advise is appreciated.
03-16-15, 03:09 PM
#366
Agree, I think I'll order these this spring.
@Velgen - do you sell direct or just through distributors? Looking at your website it looks like only distributors.
@Bob, any feedback with the 20's? With lowering the car did you have to roll the fenders? Do they rub when turning @20's?
Just trying to understand fitment of the 20's. Sorry to bring up an old thread BoB, but your car looks fantastic and I would love to do the same offset/size of wheel. Just trying to get some feedback.
Again, any advise is appreciated.
@Velgen - do you sell direct or just through distributors? Looking at your website it looks like only distributors.
@Bob, any feedback with the 20's? With lowering the car did you have to roll the fenders? Do they rub when turning @20's?
Just trying to understand fitment of the 20's. Sorry to bring up an old thread BoB, but your car looks fantastic and I would love to do the same offset/size of wheel. Just trying to get some feedback.
Again, any advise is appreciated.
Tire size is also important because it can also cause you to rub. Wheels were 20x9 +35 and 20x10.5 +45. The last setup I had wih the bronze chrome VMB8s I ran a 225/30/20 up front and a 255/30/20 in the rear
03-17-15, 10:55 AM
#367
Driver School Candidate
iTrader: (1)
Join Date: May 2010
Location: Utah
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Nah don't worry about it. I actually got a GS so I'm still lurking around the forums. I needed to roll my fenders because of how low I was. When I was higher I didn't need any fender rolling. At first I was at about a 2 inch drop with minor rubbing (probably just the plastic fender lining which I eventually just rubbed through). When I dropped it more and tucked almost all of the tire, I definstly needed to roll the fenders.
Tire size is also important because it can also cause you to rub. Wheels were 20x9 +35 and 20x10.5 +45. The last setup I had wih the bronze chrome VMB8s I ran a 225/30/20 up front and a 255/30/20 in the rear
Tire size is also important because it can also cause you to rub. Wheels were 20x9 +35 and 20x10.5 +45. The last setup I had wih the bronze chrome VMB8s I ran a 225/30/20 up front and a 255/30/20 in the rear
03-17-15, 11:54 AM
#368
In those pics, it's actually more than a 2 inch drop, I'm not sure exactly how much. Sorry I've been through a couple different setups with this car. No fender rolling was needed there because I already rubbed through the plastic lining. I only rubbed on medium to large dips
03-18-15, 10:01 AM
#371
Agree, I think I'll order these this spring.
@Velgen - do you sell direct or just through distributors? Looking at your website it looks like only distributors.
@Bob, any feedback with the 20's? With lowering the car did you have to roll the fenders? Do they rub when turning @20's?
Just trying to understand fitment of the 20's. Sorry to bring up an old thread BoB, but your car looks fantastic and I would love to do the same offset/size of wheel. Just trying to get some feedback.
Again, any advise is appreciated.
@Velgen - do you sell direct or just through distributors? Looking at your website it looks like only distributors.
@Bob, any feedback with the 20's? With lowering the car did you have to roll the fenders? Do they rub when turning @20's?
Just trying to understand fitment of the 20's. Sorry to bring up an old thread BoB, but your car looks fantastic and I would love to do the same offset/size of wheel. Just trying to get some feedback.
Again, any advise is appreciated.
Thank you
06-11-15, 11:28 PM
#372
Driver School Candidate
Join Date: Oct 2014
Location: Norcal
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
07-16-15, 07:01 AM
#373
Hey guys,
Havent posted on CL much since I sold my 2IS late last year so I wanted to post a little update. Got a GS350 Fsport in Ultra White and added a few goodies
Here are some pics from my recent photo shoot with Velgen Wheels
Wheels: Velgen VMB6 in Satin Black
Specs: 20x9 + 32 / 20x10.5 + 45
Tires: 245/30/20 / 275/30/20
Havent posted on CL much since I sold my 2IS late last year so I wanted to post a little update. Got a GS350 Fsport in Ultra White and added a few goodies
Here are some pics from my recent photo shoot with Velgen Wheels
Wheels: Velgen VMB6 in Satin Black
Specs: 20x9 + 32 / 20x10.5 + 45
Tires: 245/30/20 / 275/30/20
