2jzGTE SCs - The Siblings of my Supra MKIV Toys
#3451
This is the perfect height with 20s... I went through all the incline roads I use to pass through and in the deepest dip of my driveway , I barely have half an inch clearance before the bottom of bumper scrapes the pavement . It barely clears the humps and bumps in the neighborhood.
Took some pictures near the lake in my neighborhood on my way home.
Took some pictures near the lake in my neighborhood on my way home.
Last edited by gerrb; 01-28-16 at 03:26 PM.
#3453
Thanks Gerrb,
I'm happy now. I figured if anyone could get it installed correctly to see if it fit right it would be you. Mine is all perfect now after sitting and a couple of rounds with the heat gun. Now that I now fitment is good I'm going to start drilling some holes.
Thanks again,
Shane
I'm happy now. I figured if anyone could get it installed correctly to see if it fit right it would be you. Mine is all perfect now after sitting and a couple of rounds with the heat gun. Now that I now fitment is good I'm going to start drilling some holes.
Thanks again,
Shane
#3456
Pole Position
iTrader: (6)
ok cool. did you have to modify the pod to fit.. Im sure you had to trim some of the edges down because im guessing the pillars are different. Im checking out their site and it seems they sell them for the targa and the hardtop..by any chance do you remember which one you purchased.
Last edited by tjmhillz; 01-28-16 at 07:27 PM.
#3457
Instructor
iTrader: (24)
APC Universal Double A-Pillar Gauge Pod 2-1/16 Inch P/N 107063 Triple Pod P/N is 107082, Single Pod is P/N is 107062.
I am using the double pod for my AEM gauges, the fit is almost perfect with very little trimming. I recommend these or the SC. You can try your local PepBoys parts store they usually can get it for you. That way you can test fit it to your pillar panel in the store before you buy it. I ended up ordering mine from their eBay site.
I am using the double pod for my AEM gauges, the fit is almost perfect with very little trimming. I recommend these or the SC. You can try your local PepBoys parts store they usually can get it for you. That way you can test fit it to your pillar panel in the store before you buy it. I ended up ordering mine from their eBay site.
#3462
Shane I did not install push pins on those fog lights area . if you put the three push pins under each headlights that secure the bumper on the headlight bracket , that bumper ain't going anywhere. Those I did install. Also am looking at still installing under trays at the bottom. That will help the bumper also in place , in shape , secured and clean down there.
Last edited by gerrb; 01-29-16 at 09:03 AM.
#3463
Lexus Test Driver
yeah... these two cars have stock 2jzgte only for now but I have the brakes upgrade that I need to install soon once I am done with the body kits , paint and their exhausts upgrade. I first need to decide also on exactly what wheels I want on these cars before installing brake upgrades. Need to make sure calipers will fit on the wheels that I will settle with. IF I settle with 20s with a lot of space I will prefer to put the big brembo brakes from a Jeep so they will fill up the space and look good in there . Makes the car look better. Right now at around 400rwhp and only use the cars to ran errands in the city ..... the current brakes will do . These will be" look good" cars... hahaha.. not ..." need speed" cars that is why am installing the AC body kit . I have 6 other cars with truly built 2jzgte all making well above +850rwhp and 2 even +1200rwhp if I want speed. Speaking of which.. I just got a mouthful from my wife since she came to know the speeding tickets t I got last week and this week ...lol.
Can't wait to see pics of these cars completed.
#3465
I will eventually get these two SC cars (one 6speed and one built auto trans) on which am currently installing the AC body kit .. built engines and aftermarket twin turbos. so they even look better. They will be my look good SCs.... bragging cars as they say. The MKIVs are investments for me and probably will go one day. I will see till where their prices will go before I let go of any of them. Though right now with those 4, at the current market price , I stand to make over $80k knowing how much I paid for them.
Last edited by gerrb; 01-29-16 at 09:44 AM.