2jzGTE SCs - The Siblings of my Supra MKIV Toys
12-07-15, 07:16 AM
#3376
just installed the v160 tripod ... about to take out the bumper and other front parts of the Black Pearl so I can drop the engine on the bay
Just realized , I need to replace that damn dirty AC Compressor and Starter with one that I had already cleaned and painted. It won't take a while to replace them anyway.
Just realized , I need to replace that damn dirty AC Compressor and Starter with one that I had already cleaned and painted. It won't take a while to replace them anyway.
Last edited by gerrb; 12-07-15 at 07:35 AM.
12-07-15, 07:19 AM
#3377
Now that KBD body kits are officially doing the front bumper in poly-urethane and I have already ordered and paid for two .... soon Black Pearl and Red Mamba Two would have a similar stance to the cars pictured below . I hope KBD would do the side skirts and rear bumper in poly-urethane too but even if they don't .. the shine rear and sides wont be bad to use since the front bumper is the one that easily breaks due to humps / bumps , dips and dives on the streets.
Last edited by gerrb; 12-07-15 at 07:45 AM.
12-07-15, 02:32 PM
#3380
Lead Lap
iTrader: (17)
Join Date: Jan 2010
Location: No longer WOT, I am broke, Gerrb.
Posts: 416
Likes: 0
Received 1 Like
on
1 Post
Finally got the motor in!
Great job man, its amazing how you are making these swap looks soo easy. Better post some running video, pls..
12-07-15, 10:52 PM
#3382
The poly bumper is definitely hard to break. I have the Rideskinz Fujin lip in my 300, and because of how long these cars are, I have to pull up so close to the wheel stopper when parking forward so the back doesn't stick out in the road. Sometimes, I miscalculate the front lip, and see how much it bends when it hits the wheel stopper, and simply back it up like nothing happened. LOL
12-08-15, 10:07 AM
#3384
Gerrb. Im truly amazed on how this car and setup is coming along! Definetley not a corner cutting person. Yet so simple lol. Very rare to find your vvti 6 speed combo yet 1 of 120 manual 97 sc. If i lived down your block i would be a very depressive person lol. GL buddy
12-08-15, 05:47 PM
#3385
The poly bumper is definitely hard to break. I have the Rideskinz Fujin lip in my 300, and because of how long these cars are, I have to pull up so close to the wheel stopper when parking forward so the back doesn't stick out in the road. Sometimes, I miscalculate the front lip, and see how much it bends when it hits the wheel stopper, and simply back it up like nothing happened. LOL
thank you pare .. it will be cool to have a 1 of 120 with a 2jzgte / v160 combo . It makes it more rare .
Gerrb. Im truly amazed on how this car and setup is coming along! Definetley not a corner cutting person. Yet so simple lol. Very rare to find your vvti 6 speed combo yet 1 of 120 manual 97 sc. If i lived down your block i would be a very depressive person lol. GL buddy
. It is a wish for now and everything starts from a dream and can slowly be turned to a reality.Today .. did some painting on the fan blade , radiator , fuse box cover and fan shroud . Will install them tomorrow when they are fully dry.
.
12-09-15, 11:16 AM
#3387
hahaha ... I know you will help but you guys are working during week days. When I want something done, I want it now , not waiting for the weekend . .
got my radiator , shroud , fusebox , coil cover , IC pipes painted .....The bell of the fan shroud I decided to paint with wrinkle today so it is still drying up and be wrinkled.. but once dried, I will paint that bell with glossy black so it will be shiny like the coil cover and wrinkled at the same time.
just trying to install small things and tidying things up now .. then I will concentrate on the wiring harness which I haven't started to work on
.
.got my radiator , shroud , fusebox , coil cover , IC pipes painted .....The bell of the fan shroud I decided to paint with wrinkle today so it is still drying up and be wrinkled.. but once dried, I will paint that bell with glossy black so it will be shiny like the coil cover and wrinkled at the same time.
just trying to install small things and tidying things up now .. then I will concentrate on the wiring harness which I haven't started to work on
.
Last edited by gerrb; 12-09-15 at 11:23 AM.
12-09-15, 11:28 AM
#3388
Some similarities with Red Mamba Two ... I will install the body kits AC/Shine style from KBD on these two cars, lower them just like the cars in the pictures above since they are not high HP at the moment. They running at around 400rwhp will be good enough for now and make them look good cosmetically ......wishing this is how the SC300 came out of the factory so they are still valuable like the MKIVs even after 20 years since production ... 2jzgte with 6speed trans OR 2jzgte with built auto trans
2jzgte VVTi / V160 6 speed
2jzgte non VVTi / ATF Built Auto Transmission
2jzgte VVTi / V160 6 speed
2jzgte non VVTi / ATF Built Auto Transmission
2jzgte VVTi / V160 6 speed
2jzgte non VVTi / ATF Built Auto Transmission
2jzgte VVTi / V160 6 speed
2jzgte non VVTi / ATF Built Auto Transmission
2jzgte VVTi / V160 6 speed
2jzgte non VVTi / ATF Built Auto Transmission
2jzgte VVTi / V160 6 speed
2jzgte non VVTi / ATF Built Auto Transmission
Last edited by gerrb; 12-09-15 at 12:38 PM.
12-09-15, 02:45 PM
#3389
Pole Position
Join Date: Aug 2014
Location: GA
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
soooo real street just made a 1851hp engine using their engine dyno. roughly 1600whp.
custom pistons, tuff rods, acl bearings, arp main studs, and billet main caps. block is unfilled, stock port head, and stock oil system. squirters have been blocked off.
that's insane power for a just a 3.0.... wow
custom pistons, tuff rods, acl bearings, arp main studs, and billet main caps. block is unfilled, stock port head, and stock oil system. squirters have been blocked off.
that's insane power for a just a 3.0.... wow
