2jzGTE SCs - The Siblings of my Supra MKIV Toys
#2776
Steve - I will try to fire it up if I get to complete the little things.Got to mount intercooler and its pipings. I was thinking of installing dual denso pumps and upgrade fuel lines to E85 friendly lines so it is ready once I get hold of aftermarket twins.
#2777
White Diamond's & Red Mamba's Engine Bays
A Glance at White Diamond's and Red Mamba's Engine Bays
WD's bay look beastly but RM''s look simple and yet elegant especially in person.
Hoping to find a good deal on an aftermarket twins so RM remains a true Twin Turbo and make same power as DM.
Looking forward to working on the Blue Angel's Engine Bay which will be a combination of Polished and Blackened Parts.
So which look do you think is better ? Polished or Blackened ?
'
WD's bay look beastly but RM''s look simple and yet elegant especially in person.
Hoping to find a good deal on an aftermarket twins so RM remains a true Twin Turbo and make same power as DM.
Looking forward to working on the Blue Angel's Engine Bay which will be a combination of Polished and Blackened Parts.
So which look do you think is better ? Polished or Blackened ?
'
Last edited by gerrb; 02-20-15 at 01:02 PM.
#2778
A Sneak Peek at Blue Angel
It will have the fastest spooling +1000rwhp turbo in the market today.
Will have direct port nitrous like White Diamond so it should make more power than WD.
Engine Bay theme will be a combination of Polished and Blackened Parts.
It is a 1992 SC but will all look like a +97 in a Royal Sapphire Pearl Color (RSP) with full black interior !
That will complete my SC generations look , RM -> 1992-1994 , WD->1995-1996 , BA -> 1997-2000 and yet all 1992 . NO MORE emissions / inspections in less than 2 years !
Quick Spool Valve + Direct Port Nitrous + VVTi Head + PT-6870 = Incredibly FAST Spooling +1000rwhp Street Monster with a lot of torque down low
Precision GEN2 PT-6870 CEA Ball Bearing Turbo rated at 1100. Physical size is almost same as that of PT-6766 / PT-6765. A good sleeper look turbo
Direct Port Nitrous Nozzle under each runner
It will have the fastest spooling +1000rwhp turbo in the market today.
Will have direct port nitrous like White Diamond so it should make more power than WD.
Engine Bay theme will be a combination of Polished and Blackened Parts.
It is a 1992 SC but will all look like a +97 in a Royal Sapphire Pearl Color (RSP) with full black interior !
That will complete my SC generations look , RM -> 1992-1994 , WD->1995-1996 , BA -> 1997-2000 and yet all 1992 . NO MORE emissions / inspections in less than 2 years !
Quick Spool Valve + Direct Port Nitrous + VVTi Head + PT-6870 = Incredibly FAST Spooling +1000rwhp Street Monster with a lot of torque down low
Precision GEN2 PT-6870 CEA Ball Bearing Turbo rated at 1100. Physical size is almost same as that of PT-6766 / PT-6765. A good sleeper look turbo
Direct Port Nitrous Nozzle under each runner
Last edited by gerrb; 02-21-15 at 06:22 AM.
#2781
lmaol,,,, a couple of layers in clothing helps. Need to get Red Mamba buttoned up so I can pay attention to the Blue Angel.
So when are you starting the work on yours ?
#2784
I am keeping the GE intake manifold. Going with an ATF built trans. I had a Boostlogic in the Supra but that was 10 years ago.
Steve
Steve
#2785
i managed to get my rear wheels fitted on yesterday. doing the fronts tomorrow.
i have a spool of 0gauge wire if you need to get some.
do you have a cheap stock ODB1 ECU for the GE motors i can get for cheap? my SC is my DD and i dont wanna pay 90 bucks to get it rebuilt. dont have the time to not have car running :\
i have a spool of 0gauge wire if you need to get some.
do you have a cheap stock ODB1 ECU for the GE motors i can get for cheap? my SC is my DD and i dont wanna pay 90 bucks to get it rebuilt. dont have the time to not have car running :\
Last edited by irondonkey; 02-22-15 at 09:59 PM.
#2786
i managed to get my rear wheels fitted on yesterday. doing the fronts tomorrow.
i have a spool of 0gauge wire if you need to get some.
do you have a cheap stock ODB1 ECU for the GE motors i can get for cheap? my SC is my DD and i dont wanna pay 90 bucks to get it rebuilt. dont have the time to not have car running :\
i have a spool of 0gauge wire if you need to get some.
do you have a cheap stock ODB1 ECU for the GE motors i can get for cheap? my SC is my DD and i dont wanna pay 90 bucks to get it rebuilt. dont have the time to not have car running :\
Thanks for 0 gauge offer. I believe I still have some laying around.
Sorry I don't have a GE ODB1 ECU. Rey (PogikoSC4) has one, PM him.
#2790
Been working on my inter-cooler and its piping. I am done but not happy with the way the wrinkle came out. Doesn't look good. Will redo them some other time. Temperature is just too cold together with the snow.
Installed a plate as heat shield to prevent warmer air from the engine and radiator near the turbo intake pipe filter.
Installed a plate as heat shield to prevent warmer air from the engine and radiator near the turbo intake pipe filter.
Last edited by gerrb; 02-24-15 at 06:55 AM.