HiPSI's NA-T / Build Thread - Billet 6265 in store
#1
HiPSI's NA-T / Build Thread - Billet 6265 in store
Since this forum doesn't get much in terms of performance documentation lately and I'm bored I figured I'd start my own build thread to get my *** in gear to start the project.
My 94 SC:
Virgin Engine Bay:
Current goal is to hit 300whp safely and get the bugs worked out with the stock HG and fuel setup. Then upgrade the fuel completely and go for 450whp ish. Once that's working great and the w58 is hating life I'll eventually switch to HOPEFULLY a v160 and go for 500-600whp. This platform is very new to me and with AEM being new as well I'd rather take it slow. I'll probably end up getting AEM running, dialed in way before I try mounting the turbo for good and boosting it.
Current stock pile of parts:
Bone stock GE Motor - 90k miles
TT OEM Headgasket
ARP Headstuds - <---To buy list*
FSM FFIM
RMR 90mm Billet throttle body
TT Power Steering Reservior
Phenolic intake manifold gasket
Going Distributor-less:
7mGTE CPS w/ polished cover
IS300 Ignition coils w/ DH61 Igniter
7mGTE Harness pack to extend
ETS 4" Intercooler
Tial Q 50mm BOV
2.5" hotside IC pipes to 3" Cold Side
Precision 6265 Billet - Journal w/ 1.00 Divided Turbine (Coated & Polished)
SPracing 2JZ-GE Tubular Manifold - Ceramic Coated
4" Downpipe / Midpipe (I'll be adding a 4" E-cutout to this)
Precision 46mm Wastegate
Fujitsubo SS Cat-back
AEM EMS Ver. 2 W/ IAT- MAP - MAC valve for boost control
AEM UEGO Wideband
Fuel Mods:
Still undecided but leaning towards 1100cc High Imp FIC injectors. Still undecided on which pumps I'd like to run. Opinions or recommendations on fuel setups for 600-700whp? I'd like to steer away from something incredibly noisey like dual out of tank mounted 044's lol. From the videos that I've seen those suckers are louder than hell! Maybe dual denso TT pumps?
Drivetrain stuff:
I'll probably end up going with a cheap street disc'd clutch in the w58 for the time being until I break something. Hopefully the stock w58 will hold at least 450whp until I can justify the costs of a v160 & rear diff & axles.
Some pix of the fun stuff:
Test Fitted the turbo manifold and turbo and realized there was clearance for the throttle body / upper intercooler piping so I ordered the FSM FFIM kit from Dan:
The ebay 4" downpipe / midpipe from the MKIV TT Supra BOLTED IN with zero hacking or modifying! I was blown away. We'll see what needs to be done to the midpipe once I really bolt it down for good.
Either going to recirculate the wastegate here, or turn the wastegate outlet more and just fire it down with a 90deg dumptube, haven't decided yet.
I'll add more when it comes!
My 94 SC:
Virgin Engine Bay:
Current goal is to hit 300whp safely and get the bugs worked out with the stock HG and fuel setup. Then upgrade the fuel completely and go for 450whp ish. Once that's working great and the w58 is hating life I'll eventually switch to HOPEFULLY a v160 and go for 500-600whp. This platform is very new to me and with AEM being new as well I'd rather take it slow. I'll probably end up getting AEM running, dialed in way before I try mounting the turbo for good and boosting it.
Current stock pile of parts:
Bone stock GE Motor - 90k miles
TT OEM Headgasket
ARP Headstuds - <---To buy list*
FSM FFIM
RMR 90mm Billet throttle body
TT Power Steering Reservior
Phenolic intake manifold gasket
Going Distributor-less:
7mGTE CPS w/ polished cover
IS300 Ignition coils w/ DH61 Igniter
7mGTE Harness pack to extend
ETS 4" Intercooler
Tial Q 50mm BOV
2.5" hotside IC pipes to 3" Cold Side
Precision 6265 Billet - Journal w/ 1.00 Divided Turbine (Coated & Polished)
SPracing 2JZ-GE Tubular Manifold - Ceramic Coated
4" Downpipe / Midpipe (I'll be adding a 4" E-cutout to this)
Precision 46mm Wastegate
Fujitsubo SS Cat-back
AEM EMS Ver. 2 W/ IAT- MAP - MAC valve for boost control
AEM UEGO Wideband
Fuel Mods:
Still undecided but leaning towards 1100cc High Imp FIC injectors. Still undecided on which pumps I'd like to run. Opinions or recommendations on fuel setups for 600-700whp? I'd like to steer away from something incredibly noisey like dual out of tank mounted 044's lol. From the videos that I've seen those suckers are louder than hell! Maybe dual denso TT pumps?
Drivetrain stuff:
I'll probably end up going with a cheap street disc'd clutch in the w58 for the time being until I break something. Hopefully the stock w58 will hold at least 450whp until I can justify the costs of a v160 & rear diff & axles.
Some pix of the fun stuff:
Test Fitted the turbo manifold and turbo and realized there was clearance for the throttle body / upper intercooler piping so I ordered the FSM FFIM kit from Dan:
The ebay 4" downpipe / midpipe from the MKIV TT Supra BOLTED IN with zero hacking or modifying! I was blown away. We'll see what needs to be done to the midpipe once I really bolt it down for good.
Either going to recirculate the wastegate here, or turn the wastegate outlet more and just fire it down with a 90deg dumptube, haven't decided yet.
I'll add more when it comes!
Trending Topics
#8
Pole Position
iTrader: (8)
Looks great man!! keep up the great work!
As far as W58 holding, mine is holding jus fine and im makin ova 450+whp but then again im 1JZ...really bro it jus depends on how u drive the car, i would advise you, no launching or banging gears...
Truth be told the W58 will break, but its jus when it will break is the question, also i have a good clutch in mine, ACT Xtreme PP with ACT 6 Puck sprung disk!
Goodluck!!
As far as W58 holding, mine is holding jus fine and im makin ova 450+whp but then again im 1JZ...really bro it jus depends on how u drive the car, i would advise you, no launching or banging gears...
Truth be told the W58 will break, but its jus when it will break is the question, also i have a good clutch in mine, ACT Xtreme PP with ACT 6 Puck sprung disk!
Goodluck!!
Last edited by 94_soarer; 08-08-11 at 07:40 AM.
#9
Looks great man!! keep up the great work!
As far as W58 holding, mine is holding jus fine and im makin ova 450+whp but then again im 1JZ...really bro it jus depends on how u drive the car, i would advise you, no launching or banging gears...
Truth be told the W58 will break, but its jus when it will break is the question, also i have a good clutch in mine, ACT Xtreme PP with ACT 6 Puck sprung disk!
Goodluck!!
As far as W58 holding, mine is holding jus fine and im makin ova 450+whp but then again im 1JZ...really bro it jus depends on how u drive the car, i would advise you, no launching or banging gears...
Truth be told the W58 will break, but its jus when it will break is the question, also i have a good clutch in mine, ACT Xtreme PP with ACT 6 Puck sprung disk!
Goodluck!!
Just waiting on RMR to send the throttle body to FSM for the FFIM kit to be shipped. Hopefully my dizzy delete setup from driftmotion doesn't take to long. I just need to decide where and what IC pipe / bends I want to purchase and oil feed length from ATPturbo and order that.
Then order the fuel pump and injectors and I'm pretty much done but I'll need a clutch too. It's going to KILL me to spend money on a w58 clutch that is a throw away in the future. Anyone have a decent condition w58 clutch laying around that I can rock ?
#10
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
Im along for the ride.. And people say that Ebay parts are junk.. Case closed and proven they are not. Only time will tell if holds up.. Good luck on the build and keep the pictures coming.
#11
Pole Position
iTrader: (8)
Thanks I'm hoping it will hold for a good while! I know I'm gonna have to baby it until I can justify$$ the getrag and diff swap.
Just waiting on RMR to send the throttle body to FSM for the FFIM kit to be shipped. Hopefully my dizzy delete setup from driftmotion doesn't take to long. I just need to decide where and what IC pipe / bends I want to purchase and oil feed length from ATPturbo and order that.
Then order the fuel pump and injectors and I'm pretty much done but I'll need a clutch too. It's going to KILL me to spend money on a w58 clutch that is a throw away in the future. Anyone have a decent condition w58 clutch laying around that I can rock ?
Just waiting on RMR to send the throttle body to FSM for the FFIM kit to be shipped. Hopefully my dizzy delete setup from driftmotion doesn't take to long. I just need to decide where and what IC pipe / bends I want to purchase and oil feed length from ATPturbo and order that.
Then order the fuel pump and injectors and I'm pretty much done but I'll need a clutch too. It's going to KILL me to spend money on a w58 clutch that is a throw away in the future. Anyone have a decent condition w58 clutch laying around that I can rock ?
I feel you about spending money on a W58 clutch setup but its worth it. jus get it now then when you go 6spd jus sell the 5spd setup
#12
How much do guys get for the 5spd setups? This will be a fairly low mileage w58.