AIMGAIN LS430 Build
#1
Former Sponsor
Thread Starter
Join Date: Apr 2010
Location: CA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
AIMGAIN LS430 Build
Since you guys already know that we are the official Aimgain Distributor for North America, we knew that we needed to build an official 3T/Aimgain car. What we purchased was a 2005 LS430 silver on black. We decided on what parts we wanted for the car and came up with the following list.
1. Generations full kit
2. Aimgain Coilover Kit
3. Aimgain Wheels
4. Generation Exhaust
We unfortunately didn't have a whole lot of time to get this done for SEMA so off to K&W for the paint and fit, which turned out to be really nice so not to much effort there. We got the parts painted and fitted to the car and got it back on the day before we were leaving for SEMA. From there, we worked on the suspension, mounting of the tires onto the wheels and the final touches. Here is a bit of the picture story of how it all went down. Enjoy!
1. Generations full kit
2. Aimgain Coilover Kit
3. Aimgain Wheels
4. Generation Exhaust
We unfortunately didn't have a whole lot of time to get this done for SEMA so off to K&W for the paint and fit, which turned out to be really nice so not to much effort there. We got the parts painted and fitted to the car and got it back on the day before we were leaving for SEMA. From there, we worked on the suspension, mounting of the tires onto the wheels and the final touches. Here is a bit of the picture story of how it all went down. Enjoy!
Trending Topics
#8
More pix please I like to see the exhaust and what looks like trunk spoiler mounted. Pricing would be nice too. Front bumper not too aggressive, to the untrained eye, it may look like a stock pre 04.
#9
Former Sponsor
Thread Starter
Join Date: Apr 2010
Location: CA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
LED is optional for the front bumper or rear bumper. Wheel spec is 20x10 ET34 20x9 et37.
I will post the pics here soon. Since all the pics i have is not any good
#10
#13
Former Sponsor
Thread Starter
Join Date: Apr 2010
Location: CA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
I know some of you guys wanted pictures of the rear of the car and finally since the rains have gone, here they are.
Last edited by 3Tmotrsprt; 01-07-11 at 04:07 PM.
#14
Lead Lap
iTrader: (1)
Join Date: Nov 2006
Location: JP (oki to be precise :D)
Posts: 4,918
Likes: 0
Received 2 Likes
on
2 Posts
thanks for the rear pics, not a bad job but i would have thought the fitment would be a little more aggressive for the wheels and fenders. i love the rear bumper and exhaust + trunk lip spoiler look. any thoughts about lowering it moreż what happens to the car now, i'm guessing its somebody's personal car?
#15
Former Sponsor
Thread Starter
Join Date: Apr 2010
Location: CA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the compliments. The look of the car is a compromise between daily driver and looks. The car rubs as is in the rear when you hit dips at speed so until we either trim the inside of the quarter panel or flare it a bit this is as low as its going to get for now. The front is low enough to the point where at some driveways we are very close to scratching. This car belongs to our general manager here at 3T and he likes the way it looks so I'm guessing it won't be going anywhere anytime soon. I also have just purchased a Q45 that will hopefully be getting the AimGain treatment as well. I'll keep you guys posted but I don't know if I'm allowed to be posting non Lexus related automobiles here at CL.